VPL-A1003F-PJ12AA

The VPL-A1003F-PJ12AA is a rotary servo motor from Allen-Bradley. It is specifically part of the Kinetix VPL product series which are specially made compatible for use with Kinetix 5500 and Kinetix 5700 dual-axis inverters. This servo motor is essentially a Brushless AC Synchronous motor built with high-energy rare earth magnets, 3-inch Magnet stack length, and 100-mm Bolt Circle Diameter (BCD). For connection to the input voltage supply, this motor utilizes a single SpeedTec DIN connector, in right angle orientation that is rotatable up to 325° ensuring fast, easy, tight, and secured connection even with relatively high-vibration installations. The VPL-A1003F-PJ12AA is a 200 V class motor with a rated speed of 5500 revolutions per minute (rpm). It has a continuous stall torque rating of 4.18 Nm (37.0 lb-in); Peak stall Torque of 11.15 Nm (99.0 lb-in) while the rated output power is 1.90 kW (2.55 Hp.). It delivers a rotor inertia of 0.00012 kg-m2 (0.0010 lb-in-s2). This servo motor has an inherent protection rating of 1P50 however, it can reach up to IP65 when the appropriate optional shaft seal and environmentally sealed cable connector. Appropriate shaft seal for use with this servo motor has a catalog number of MPL-SSN-A3B3. This servo motor is specially made for use in a wide variety of industrial applications. Some of these applications include Packaging, Converting, Material handling, Electronic assembly, Automotive, and other processes. The motor is equipped with an 18-bit, absolute, multi-turn encoder that serves as the motor’s position feedback which is sent back to the compatible Kinetix Servo drive.

The VPL-A1003F-PJ12AA is a single-phase VPL low-inertia motor drive manufactured by Rockwell Automation. The VPL-A1003F-PJ12AA belongs to the Kinetix rotary motion control series from Allen-Bradley, a Rockwell Automation subsidiary. The input voltage rating of the VPL-A1003F-PJ12AA is 240 Volts AC. The VPL-A1003F-PJ12AA comes with a keyed shaft for shaft extension purposes. The rated speed of the VPL-A1003F-PJ12AA is 4500 RPM with an F winding. It has a wired electric power source and it runs at 277 Volts AC. The VPL-A1003F-PJ12AA has an IEC metric mounting flange for easy setup and installation. This servo motor has built-in 18-bit single-turn digital high-resolution encoder. The VPL-A1003F-PJ12AA has a 1-stage operating phase when activated. The stock color and finishing color of the VPL-A1003F-PJ12AA is black. This servo motor comes with 2 magnetic stacks. The device is shipped with all the requisite mounting and installation parts. The drive also supports a 100-millimeter bolt circle frame size. The standard display of the VPL-A1003F-PJ12AA comes with a SpeedTec Right Angle DIN connection that is rotatable at up to 325 degrees for easier mounting and installation, as well as with a compact brushless motor controller that supports high-end and high-performance operations. The motor has a power factor of 0.98. It requires an open type IP88 enclosure (which comes pre-installed) or any enclosures above the IP88 model to enclose the device for safety purposes.