VPL-A1153C-PJ12AA

The VPL-A1153C-PJ12AA servo motor from the Allen-Bradley VP-series is a synchronous servo motor with 2500 RPM maximum speed. The motor requires 200 Volts AC input voltage and it delivers 1.35 kilowatts of output. The VPL-A1153C-PJ12AA servo motor is a low-inertia motor with 0.0033 lb-in-s2 of rotor inertia. The bolt circle diameter or motor frame size is 115 millimeters. The motor shaft is keyed and the number of magnet stacks on the motor is 3. The motor connects to Allen-Bradley Kinetix 5700 and Kinetix 5500 drives through a single circular DIN connector. The feedback comes from an 18 bit multi-turn digital high-resolution encoder. A holding brake is not included. For the mounting of the motor, an IEC metric flange is provided.

When the VPL-A1153C-PJ12AA servo motor arrives, the motor should be carefully removed from the shipping container and it should be inspected for damage. The protective cap installed on the motor shaft should be removed manually or with a screwdriver. Tools such as hammers should not be used because the shaft could be damaged. To prolong the motor life, drip loops should be created in the motor cable, shields should be used to protect the motor housing, shafts, and seals from contaminants and periodic inspection of the shaft seals and the motor should be performed. Motor parts should be replaced if excessive wear is detected during the inspection. The operating temperature range for the VPL-A1153C-PJ12AA servo motor is from 0 to 40 degrees Celsius. The storage temperature range is from -30 to 40 degrees Celsius. The environment used for motor storage should be non-corrosive. The environmental protection rating of the motor with the shaft pointed down, horizontally, or up is IP 53, IP 51, and IP 50, respectively.