VPL-B0631T-CJ12AA

The Allen-Bradley VPL-B0631T-CJ12AA servo motor is a servo motor which is efficient and compact in size. These motors are controlled by using a pulse width modulation signal. The motor receives the input signal which is applied to the DC motor and which in turn aids the shaft in changing its position. The servo motor works with the servo mechanism. The VPL-B0631T-CJ12AA servo motor is part of the Allen-Bradley VPL series. This servo motor uses low inertia and it is manufactured with a keyed shaft. The speed rating of the drive is 6750 RPM with regular loading conditions. The motor runs with 400 Volts of input voltage. The motor uses a magnetic stack of 1 inch. For mounting, the servo motor uses an IEC metric flange and free mounting holes that are type FF mounting holes. The servo motor is not water-resistant. It can only be used inside a factory.

The VPL-B0631T-CJ12AA servo motor has the ability to provide real-time performance information to the control system by using a digital feedback system. In this servo motor variant, the servo motor uses an 18-bit absolute single-turn digital feedback encoder. This 18-bit encoder follows the Hiperface DSL protocol. This protocol is known for its speed and precision. It has all the advantages of a digital real-time interface which delivers an enormous increase in efficiency. The VPL-B0631T-CJ12AA servo motor uses a single SpeedTEC DIN connector that is installed at a right angle for connecting the servo motor with the other manufacturing devices. This connector can be rotated at an angle of up to 325 degrees. This servo motor has the standard factory control options and it can accommodate other compatible peripherals. The VPL-B0631T-CJ12AA servo motor has no holding brake in it.