VPL-B0631T-PJ12AA

The VPL-B0631T-PJ12AA servo motor is a shaft key enabled servo motor device from Allen-Bradley that is a 400 Volts rated unit with a speed rating of 6750 RPM. This servo motor variant belongs to the Allen-Bradley VPL series. Allen-Bradley VPL series servo motors are known for smooth and integrated motion control over the Ethernet/IP network. These motors are optimized to run with the Allen-Bradley Kinetix 5500 and Kinetix 5700 series drives. The VPL-B0631T-PJ12AA servo motor can be mounted in the system cabinet by using the free mounting holes and an IEC metric flange. The body of the servo motor is made up of stainless steel and it is manufactured in a 63-millimeter frame. A Hiperface DSL enabled 18-bit multi-turn encoder is equipped in the servo motor to monitor the device for real-time feedback.

The VPL-B0631T-PJ12AA servo motor must be installed in an EMC noise-free environment. To maximize the life of the motor, a drip loop in the single motor cable to carry liquids away from the connection to the motor should be created. Also, additional shields that protect the motor housing, shaft, seals, and junctions from contamination should be added to the servo motor. The motor and seal of the device should be inspected regularly. The VPL-B0631T-PJ12AA servo motor has a minimum operating temperature of 0 degrees Celsius and a maximum operating temperature of 40 degrees Celsius. The storage temperature of the servo motor ranges from -30 degrees Celsius to 40 degrees Celsius. The installation of the servo motor should be done in an environment with relative humidity between 5 and 95%. The VPL-B0631T-PJ12AA servo motor is manufactured in a compact size and it weighs only 1.04 kilograms. The servo motor can be controlled remotely by using serial communication. The servo motor offers robust and stable performance.