VPL-B0632F-PK14AA

The VPL-B0632F-PK14AA servo motor is an Allen-Bradley VPL Kinetix servo motor. It is a member of the low-inertia series and its voltage rating is 400 Volts. The speed rating is 4500 revolutions per minute and its continuous and peak stall torque ratings are 0.93 N-m and 2.69 N-m, respectively. It has a 370-watt power rating and the rotor inertia is rated 0.000017 kg-m2. The winding insulation of the VPL-B0632F-PK14AA servo motor is optimized to provide improved thermal management and heat transfer to ensure that the motor does not overheat during operation. The high-energy rare earth magnets and innovative winding technology that are built into the VPL-B0632F-PK14AA low-inertia servo motor combine to provide excellent acceleration and torque performance. This servo motor has a compact design with a 63-millimeter frame size and a smooth shaft.

The VPL-B0632F-PK14AA servo motor features an 18-bit digital encoder for absolute position feedback and it is equipped with a 24 volts DC holding brake capable of holding the shaft at 0 revolutions per minute between operations or of serving as an occasional stopping brake. Mounting the VPL-B0632F-PK14AA low-inertia servo motor horizontally or vertically with the shaft facing up or down will not negatively affect its performance. A shaft seal may be used to provide an IP 66 protection rating at is shaft and an enclosure may be used to provide additional environmental protection for the servo motor’s body and connections. The connector type on this servo motor is a single SpeedTec DIN, 325 degrees rotatable connector which supports the use of a single cable that houses all power, signal, and brake connections to the servo motor.