Product image is representative; revision or series may vary. Contact us to request a specific version.
VPL-B0632T-CJ12AA
The VPL-B0632T-CJ12AA servo motor is a low-inertia servo motor from the Allen-Bradley/Rockwell Automation VPL Servo Motors series. It operates in the 400 Volts voltage class and its rated speed is 6750 RPM. The VPL-B0632T-CJ12AA low-inertia servo motor uses 2 internal rare-earth magnet stacks to achieve its low-inertia operation. This servo motor derives its feedback from an absolute single-turn type of encoder. The VPL-B0632T-CJ12AA low-inertia servo motor has a shaft key, but no shaft seal.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for VPL-B0632T-CJ12AA
| Manufacturer | Allen Bradley |
|---|---|
| Product Type | Low-inertia Servo Motor |
| Product Line | VPL Servo Motors |
| Part Number | VPL-B0632T-CJ12AA |
| UPC | 885630845494 |
| Weight | 3.00 lbs (1.36 kg) |
| Voltage | 400V |
| Frame Size | 63 mm |
| Rated Speed | 6750 rpm |
| Magnet Stacks | 2 |
| Feedback | 18-bit absolute single-turn digital encoder (Hiperface DSL protocol) |
| Shaft | Shaft Key |
| Connector | Single SpeedTec DIN connector, right angle, 325° rotatable |
| Mounting Flange | IEC metric, free mounting holes (type FF) |
| Factory Options | Standard |
The Allen-Bradley VPL-B0632T-CJ12AA servo motor is a VPL series low-inertia synchronous servo motor. It is designed to be used with Allen-Bradley Kinetix 5700 and Kinetix 5500 drives. The optimized size of the VPL series servo motors leads to lower system costs and it also improves energy efficiency. The VPL-B0632T-CJ12AA servo motor supports AC input at 400 Volts AC. It has a 63-millimeter frame size and a magnet stack length of 2. The rated motor speed is 8000 RPM. The feedback on the motor is provided by an 18-bit absolute single-turn digital encoder which supports the Hiperface DSL protocol. The encoder has an electromechanical design and therefore it does not require a battery.
The VPL-B0632T-CJ12AA servo motor connects with supported drives through a single right-angle SpeedTech DIN connector which is 325 degrees rotatable. The single-cable design eliminates hardware and wire terminations. Cables are available in 1-meter increments that are up to 50 meters long for Kinetix 5500 drives and up to 90 meters long for Kinetix 5700 drives. Third-party and customer-made cables are not supported. The drive comes with a shaft key but without a brake. Options kits for a 24 Volts DC brake and shaft seal can be ordered from Allen-Bradley if required. Type FF holes are provided for mounting the motor on the IEC metric motor flange. The maximum and rated speed of the VPL-B0632T-CJ12AA servo motor is 8000 RPM. The output power rating is 0.72 Horsepower. The rotor inertia and continuous and peak stall torque for the VPL-B0632T-CJ12AA servo motor are 0.000017 kg-m2, 0.93 N-m, and 2.69 N-m, respectively. The approximate weight of the VPL-B0632T-CJ12AA servo motor is 1.36 kilograms.
| Revision Part # | Also known as | |
|---|---|---|
| VPL-B0632T-CJ12AA Ser A | VPL-B0632T-CJ12AA/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- VPL-80632T-CJ12AA
- VPL-8O632T-CJI2AA
- VPL-B0632T-CJI2AA
- VPL-BO632T-CJ12AA
- VPL80632TCJ12AA
- VPL8O632TCJI2AA
- VPLB0632TCJ12AA
- VPLB0632TCJI2AA
- VPLBO632TCJ12AA
The Allen-Bradley VPL-B0632T-CJ12AA Low-inertia Servo Motor has a 400V Voltage and a 6750 rpm Rated Speed. It also contains a 63 mm Frame Size and an IEC metric, free mounting holes (type FF) Mounting Flange.