VPL-B0632T-PJ12AS

The Allen Bradley VPL-B0632T-PJ12AS Kinetix VPL Low Inertia Servo Motor is a low inertia brushless AC servo motor and a member of the Kinetix Bulletin VP series of low inertia servo motors used in most motion systems, with very stringent motor demands. This motor features very high torque to size ratio by design, around a single cable wiring for easy connection and installation, and it incorporates Safety Integrity Level (SIL) rated 18-bits multiple digital encoders for safe operation. The VPL-B0632T-PJ12AS has a power output rating of 12 Horsepower with a standard rotor speed of 8000 RPM, and an operating voltage of 400 Volt AC. It has a standard rotor inertia rating of 0.0000094 Kilogram-metre square, with 4 Pounds-Inches stall torque rating, and a peak torque rating of 12 pounds per inch.

To eliminate unusual hardware and wire terminations, it comes with a single cable design technology and it provides an absolute position feedback using an 18-bit high-resolution Multi-turn encoder with 262,144 maximum counts per revolution. The VPL-B0632T-PJ12AS does not come with a 24 Volt breaking option, but like all VPL motors, it has a 20,000 standard bearing fatigue life with a 15.1 maximum rated radial load at 8000 RPM. It has a shaft key option with double rotor magnet stacking and a frame size of 60 millimeters. The VPL-B0632T-PJ12AS has IEC rated metric mounting, with free mounting holes, rotatable SpeedTec DIN connector with a 325-degree rotation. The VPL-B0632T-PJ12AS also has a field replaceable Shaft seal option, suitable for an IP66 rated environmental enclosure, and it utilizes environmentally sealed cable connectors. The VPL-B0632T-PJ12AS has a net mounting volume of 193.1 x 150.2 x 55.0 millimeters, with an average weight of 1.36 kilograms and CE, UL, and CSA certifications.