VPL-B0633M-PJ14AA

The Allen Bradley VPL-B0633M-PJ14AA Low Inertia Servo Motor is a Brushless AC synchronous servo motor in the Kinetix VPL family of low inertia servo motors, which is designed to meet the stringent motor needs of most high-performance motion systems. It features high energy rare-to-earth magnetic rotor, with single cable drive to motor connection technology for simplified operation, and a safety rated Hiperface DSL encoder protocol for smooth operation. The VPL-B0633M-PJ14AA has Volt AC voltage class, with maximum output power rating of 0.57 Kilowatts (0.76 HorsePower), and a maximum rotor speed of 6500 RPM. It has a continuous stall torque rating of 1.27 Newton-meter (11.0 pounds per inch), with peak stall rating of 4.09 Newton-meter (36 pounds per inch), and it has a rated rotor inertia 0.000017 Kilogram-metre square.

The VPL-B0633M-PJ14AA is designed to operate with a 20,000-hour maximum fatigue bearing life at rated maximum Axial and Radial loads, and it comes with a 24 Volt DC braking option with a 1.5 Newton-metre holding brake torque and with a 0.297 to 0.363 braking coil current. The VPL-B0633M-PJ14AA features a single cable design, which helps eliminates unnecessary hardware and wire terminations; it also features an 18-bit absolute multi-turn digital encoder (Hiperface DSL protocol) with 4096 turns. This motor has 63 millimeters frame dimension with 3 magnetic stacks, and it has a shaft key with a Single SpeedTec DIN connector rotatable through a 325-degree angle. Like every VPL servo motors, the VPL-B0633M-PJ14AA has an IEC metric rated flange mounting with type FF free mounting holes, and it comes standard with IP65 rated environmental enclosure with shaft seal. The VPL-B0633M-PJ14AA weighs approximately 1.68 kilograms (excluding brake) and has a total mounting dimension of 193.1 x 150.2 x 55.0 millimeters.