VPL-B0633T-PK12AA

The VPL-B0633T-PK12AA is a low-inertia motor manufactured by Allen-Bradley. When users receive the motor for the first time, they must inspect the packaging and the motor for any visible signs of damage. Before the users install the motor, they must remove the motor from the shipping container first. Then they need to examine the motor frame, the output shaft, and the mounting pilot for any defects. If the users see any damage, they must report it to the supplier and the shipping company immediately. Then they need to remove the protective cap from the shaft with their hands or with a screwdriver. Do not use a hammer or any similar blunt object in order to prevent damage to the shaft.

While installing the cable to the motor, it is recommended to keep the length of the cable as short as possible in order to avoid any interference, and the users must also ground the cable shield to prevent any EMI interference from other equipment that might affect the performance of the motor. The input operating voltage of the VPL-B0633T-PK12AA is 400 Volts AC and the motor has a frame size of 63 millimeters. The rated speed of the VPL-B0633T-PK12AA is 6750 RPM and it has an 18-bit rated absolute multi-turn encoder with up to 4096 revolutions. There is a SpeedTec DIN connector for making connections to the motor and the motor does not have any built-in brakes. The ambient operating temperature range for the environment in which the VPL-B0633T-PK12AA must be operated is one of 0 to 40 degrees Celsius. To prevent electrical noise, the users must use shielded cables and isolate the power transformers. The users can also install line filters on the AC input power lines.