Product image is representative; revision or series may vary. Contact us to request a specific version.
VPL-B0752E-PJ14AA
The VPL-B0752E-PJ14AA servo motor is a brushless servo motor from the Allen-Bradley/Rockwell Automation VPL series. Its shaft comes with a shaft key, but no shaft seal. However, an optional shaft seal and optional environmentally sealed cable connectors can be installed on the VPL-B0752E-PJ14AA brushless servo motor to make it completely waterproof and dust-proof. The ambient operating temperature range for this drive is from 32 to 104 degrees Fahrenheit while the ambient storage temperature range for this drive is from -22 to 104 degrees Fahrenheit. The VPL-B0752E-PJ14AA brushless servo motor’s shaft operates at a maximum rotation speed of 3500 RPM.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for VPL-B0752E-PJ14AA
| Manufacturer | Allen Bradley |
|---|---|
| Product Type | Low-inertia Servo Motor |
| Product Line | VPL Servo Motors |
| Part Number | VPL-B0752E-PJ14AA |
| Weight | 10.00 lbs (4.54 kg) |
| Voltage | 400V |
| Frame Size | 75 mm |
| Rated Speed | 3500 rpm |
| Magnet Stacks | 2 |
| Feedback | 18-bit absolute multi-turn digital encoder (Hiperface DSL protocol) |
| Shaft | Shaft Key |
| Connector | Single SpeedTec DIN connector, right angle, 325° rotatable |
| Mounting Flange | IEC metric, free mounting holes (type FF) |
| Factory Options | Standard |
| Brake | 24V DC |
The Allen-Bradley VPL-B0752E-PJ14AA servo motor is manufactured with a DC motor which is regulated by a potentiometer. The main function of servo motors is to use a pulse width modulated signal and apply power to the DC motor which in turn rotates the shaft position. The VPL-B0752E-PJ14AA servo motor uses a 24 Volts DC brake as a holding brake. The voltage rating of the device is 480 Volts AC. The torque rating of the servo motor is 1.61 N-m and the speed rating of the drive is 3500 RPM. The servo motor comes with an E-winding has a magnetic stack of 2 inches. The Allen-Bradley VPL-B0752E-PJ14AA servo motor is used in different kinds of industries. The servo motor device is equipped with a single cable which is used for real-time feedback. The single SpeedTec DIN connector helps the motor to connect with the factory automation system. It can be rotated at an angle of up to 325 degrees. The servo motor has been awarded with different standards including the C-Tick, CSA, UL, and the CE standards. The motor can be used in different regions that accept the CE rating.
The Allen-Bradley VPL-B0752E-PJ14AA servo motor should be placed in an area that is clean and free from corrosive gas and vapors. Other devices that dissipate a large amount of heat should be kept away from the servo motor. No electromagnetic noise should be present in the installation area. EMC noise also reduces the performance of the servo motor. The VPL-B0752E-PJ14AA servo motor uses a bolt circle frame and it uses an IEC metric flange for the mounting of the servo motor. The servo motor has been built on the integrated architecture of the Kinetix 5500 servo drives. The motor comes with a new option with integrated safety features over the Ethernet/IP network for internal communication.
| Revision Part # | Also known as | |
|---|---|---|
| VPL-B0752E-PJ14AA Ser A | VPL-B0752E-PJ14AA/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- VPL-80752E-PJ14AA
- VPL-8O752E-PJIAAA
- VPL-B0752E-PJ1AAA
- VPL-B0752E-PJI4AA
- VPL-BO752E-PJ14AA
- VPL80752EPJ14AA
- VPL8O752EPJIAAA
- VPLB0752EPJ14AA
- VPLB0752EPJ1AAA
- VPLB0752EPJI4AA
- VPLBO752EPJ14AA
The Allen-Bradley VPL-B0752E-PJ14AAÂ Low-inertia Servo Motor has a 400V Voltage and a 3500 rpm Rated Speed. It also contains a 75 mm Frame Size and an IEC metric, free mounting holes (type FF) Mounting Flange.