VPL-B0752E-PJ14AS

The VPL-B0752E-PJ14AS servo motor is an Allen-Bradley Kinetix servo motor. It has been designed and manufactured with small dimensions and it has optimized power density. The winding option on the motor has been designed to match different drive ratings which in turn allows for efficient system sizing. The VPL-B0752E-PJ14AS servo motor uses a 24 Volts DC brake as a holding brake for controlling the speed of the shaft. The motor is equipped with a digital feedback system. It provides feedback in real-time and passes it to the control system. The motor operates with 480 Volts AC voltage. The motor has 2 magnetic stacks and it is equipped with an E-winding. The E-winding has been optimized to match different drive ratings. The VPL-B0752E-PJ14AS servo motor provides safety options for a hardwired network. The innovative common AC/DC bus in the motor eliminates hardware, and it reduces the installation time and lowers the overall costs.

The Allen-Bradley VPL-B0752E-PJ14AS servo motor comes with an Ethernet/IP network, which uses the CIP sync and CIP motion technology which provides real-time closed-loop motion control with the standard ethernet accommodation. The servo motor runs with the Hiperface protocol. The protocol helps the servo motor to meet different kinds of requirements from digital drive controllers. The VPL-B0752E-PJ14AS servo motor is equipped with a shaft key which connects the shaft to transmit power inside the motor. The servo motor is housed inside a 74-millimeter frame body which is not water-resistant.  For added protection, an additional shaft seal can be installed to the servo motor. Certain guidelines should be met for the installation of the servo motor. The installation area should be dry and free from dust and dirt. The motor should be properly grounded before switching it on.