VPL-B0752M-PK12AA

The VPL-B0752M-PK12AA motor is a low-inertia servo motor which is manufactured by Allen-Bradley. It has a rated operating speed of up to 6000 RPM and the input operating voltage of the motor is 400 Volts AC. The motor has a frame size of 75 millimeters and the magnet stack length of the motor is 2 stacks maximum. The users need to operate the motor in an ambient temperature range of 0 to 40 degrees Celsius. The humidity of the environment in which the motor is operated should be between 5 and 95%. It is meant to be operated in a non-corrosive environment. The VPL-B0752M-PK12AA motor has an IP66 rating, which is resistant to dust and jet sprays, but these ratings are only for reference and the users can check the international standards for a complete description of all the ratings.

To prevent damage to the VPL-B0752M-PK12AA motor, the users must not lift the motor from the shaft because the cap on the shaft may slip and the users may damage the motor. Before the users begin the installation they should check the motor for any visible damages and inform the supplier if they see any. The VPL-B0752M-PK12AA has a multi-turn encoder which communicates over the Hiperface DSL protocol and has a resolution of 18-bits. The users must use stainless steel fasteners for installing the motor and the motor installation must comply with the local regulations. The users must make sure all that the functional tests and the inspections have been completed before the equipment is handed over to the users. The cables must not be restrained and they should be free from tension to avoid any damage. If users need any assistance, they can contact the support team for further assistance.