Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley VPL Servo Motors VPL-B0753M-PJ12AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

VPL-B0753M-PJ12AA

|
Need a Specific Revision?

The VPL-B0753M-PJ12AA low-inertia servo motor has been designed and manufactured by Allen-Bradley/Rockwell Automation in the VPL Servo Motors series. It can operate with low levels of inertia thanks to its rare-earth magnets that are installed inside it in 3 magnet stacks. The VPL-B0753M-PJ12AA low-inertia servo motor supports a rated motor operating speed of 6000 RPM. It uses feedback from an absolute multi-turn digital encoder which supports the Hiperface DSL protocol. The VPL-B0753M-PJ12AA low-inertia servo motor can operate at 0 to 40 degrees Celsius or 32 to 104 degrees Fahrenheit.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for VPL-B0753M-PJ12AA

ManufacturerAllen Bradley
Product TypeLow-Inertia Servo Motor
Product LineVPL Servo Motors
Part NumberVPL-B0753M-PJ12AA
UPC884951972551
Weight5.00 lbs (2.27 kg)
Voltage400 Volts AC
Frame Size75 millimeters
Rated Speed6000 RPM
Magnet Stacks3
Feedback18-bit absolute multi-turn digital encoder (Hiperface DSL protocol)
ShaftShaft Key
ConnectorSingle SpeedTec DIN connector, right angle, 325° rotatable
Mounting FlangeIEC metric, free mounting holes (type FF)
Factory OptionsStandard
Request a Repair

The Rockwell Automation VPL-B0753M-PJ12AA is a VPL-series low-inertia motor with 3 magnetic stacks. The motor uses the standard IEC 72-1 mounting dimensions and a shaft-end threaded hole. For connections, the VPL-B0753M-PJ12AA has a single SpeedTec connector that accommodates a maximum rotation of 325 degrees. With a single connector, the motor accommodates a cable by utilizing the sophisticated single cable technology which bundles the signal cables into the power cable, and at the same time, it keeps electromagnetic interference at the required minimum levels. The connector should be rotated into the best position, and it should remain in this position without further adjustments. The position of the connector will define the international protection rating. The VPL-B0753M-PJ12AA has a low-rotor inertia and it is specifically designed to match the Kinetix 5500 drive ratings.

The VPL-B0753M-PJ12AA, like other Kinetix low-inertia motors, is suitably conditioned to be used in metal forming, converting, electronic assembly, and packaging applications. The motor has a 6000 revolutions per minute speed and an 18-bit multi-turn digital encoder. The VPL-B0753M-PJ12AA has a 75-millimeter frame size. The motor is rated for operation in an environment with an ambient temperature not exceeding 40 degrees Celsius and not falling below 0 degrees Celsius. When storing the VPL-B0753M-PJ12AA, a temperature of between -30 and 40 degrees Celsius should be maintained. Additionally, the motor should be stored in a non-corrosive environment. Since the VPL-B0753M-PJ12AA does not have a shaft seal, when it is mounted with its shaft facing downwards, it has an IP53 international protection rating which makes it dust-tight and offers protection against powerful water jets.

Revision Part #Also known as
VPL-B0753M-PJ12AA Ser AVPL-B0753M-PJ12AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.