VPL-B0753M-PJ14AA

The VPL-B0753M-PJ14AA servo motor is an Allen-Bradley rotary servo motor that is used for controlling the angular position of a machine. A servo motor accepts a PWM signal as its input. The VPL series motors are continuous-duty servo motors which are designed and manufactured for optimized performance. It is compatible with other Allen-Bradley peripheral devices. This servo motor is used widely in industrial automation applications. It helps to meet the demands of applications with high torque and high-speed requirements. The VPL-B0753M-PJ14AA servo motor offers a feedback encoder and single-cable capability and a field-replaceable fan which adds a boost to the main functions. The VPL-B0753M-PJ14AA servo motor has a rated speed of 6000 RPM. The servo motor is manufactured by using permanent magnet technology made up of rare earth materials. It helps to increase the maximum speed and low torque ripple. The motor is certified with different standards including the CE standards. This servo motor also meets all the requirements necessary to meet the EMC standard. The operating temperature of the servo motor ranges between 0 and 40 degrees Celsius.

The Allen-Bradley VPL-B0753M-PJ14AA servo motor has a shaft end threaded hole which increases the efficiency of the motor. This brushless AC synchronous servo motor is not water-resistant and it should be protected from water damage and water sprays. The permanent magnets in the motor are designed to operate in the field-weakening mode to widen the speed range. Operation in the field-weakening mode can result in back EMF voltage which in turn increases to a level that exceeds the DC bus voltage if a loss of control occurs. The motor is also enabled with the Hiperface DSL encoder protocol.