Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley VPL Servo Motors VPL-B1002E-PJ14AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

VPL-B1002E-PJ14AA

|

The VPL-B1002E-PJ14AA servo motor is a low-inertia servo motor that comes with a built-in holding brake. It is manufactured by Allen-Bradley/Rockwell Automation as part of the VPL Servo Motors series. The VPL-B1002E-PJ14AA low-inertia servo motor’s holding brake is designed to hold the motor’s shaft at 0 RPM until the motor reaches a specific torque level. However, the holding brake is not designed to stop the motor’s shaft while it is spinning and it should not be used as a safety or emergency device. The VPL-B1002E-PJ14AA low-inertia servo motor’s voltage rating is 400 Volts, its holding brake’s voltage rating is 24 Volts DC, and its motor speed rating is 3500 RPM.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for VPL-B1002E-PJ14AA

ManufacturerAllen Bradley
Product TypeLow-Inertia Servo Motor
Product LineVPL Servo Motors
Part NumberVPL-B1002E-PJ14AA
Weight10.00 lbs (4.54 kg)
Voltage400 Volts
Frame Size100 millimeters
Rated Speed3500 RPM
Magnet Stacks2
Feedback18-bit absolute multi-turn digital encoder (Hiperface DSL protocol)
ShaftShaft Key
ConnectorSingle SpeedTec DIN connector, right angle, 325° rotatable
Mounting FlangeIEC metric, free mounting holes (type FF)
Factory OptionsStandard
Brake24 Volts DC

The VPL-B1002E-PJ14AA is a brushless low-inertia servo motor from the Kinetix VP series of products. Manufactured by Allen Bradley/Rockwell Automation, this AC synchronous servo motor is designed for high-performance motion systems. What makes the VPL-B1002E-PJ14AA stand out is the optimized sizing of the system which enables a reduction of costs while maximizing energy efficiency at the same time. This compact motor is approximately 26.6 millimeters (1.05 inches) wide, 195.2 millimeters (7.68 inches) long, and 131.2 millimeters (5.17 inches) high. The motor weighs approximately 3.56 kilograms (7.85 pounds). This rotary motor is typically used in the automotive industry, and it is particularly useful in applications for material handling, packaging, and electronic assembly.

The rated voltage of the VPL-B1002E-PJ14AA is 200 Volts, whereas its rated output amounts to 1.86 kilowatts (2.49 Horsepower). The maximum speed this motor can achieve does not go beyond its rated speed, which is 6000 revolutions per minute. The motor comes with 2 stacks of rare-earth magnets with high energy. The motor has a frame size of 100 and it comes with a 24 Volts DC brake. Furthermore, the VPL-B1002E-PJ14AA is equipped with a shaft key and a single SpeedTec DIN connector which is rotatable. When it comes to the mounting flange, the motor uses the IEC metric flange with free mounting holes. Feedback is obtained using a Hiperface DSL protocol – more specifically, using the 18-bit multi-turn encoder. The VPL-B1002E-PJ14AA can be easily installed due to its single-cable design which avoids the terminations of wire and hardware and enables digital communication between the motor and the drive. Some important characteristics of the motor include reliability and dynamic performance. In order to prolong the life of the motor, the users must follow the guidelines given by the manufacturer concerning the mounting of the motor, as well as the optimal ambient conditions at the place intended for installing or storing the drive.

Revision Part #Also known as
VPL-B1002E-PJ14AA Ser AVPL-B1002E-PJ14AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.