Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley VPL Servo Motors VPL-B1003F-CJ14AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

VPL-B1003F-CJ14AA

|
Need a Specific Revision?

The VPL-B1003F-CJ14AA servo motor is a brushless low-inertia servo motor with powerful permanent magnet technology. It has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the VPL Servo Motors series and as a member of the 400 Volts voltage class within the series. The VPL-B1003F-CJ14AA brushless low-inertia servo motor supports a maximum shaft speed of 4500 RPM and after the shaft has stopped, it can be held at 0 RPM by the motor’s 24 Volts DC holding brake until it reaches the required torque level for a specific application. The operating temperature range for this servo motor is from 0 to 40 degrees Celsius while its storage temperature range is from -30 to 40 degrees Celsius. The VPL-B1003F-CJ14AA brushless low-inertia servo motor has a single-turn digital encoder for feedback.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for VPL-B1003F-CJ14AA

ManufacturerAllen Bradley
Product TypeLow-inertia Servo Motor
Product LineVPL Servo Motors
Part NumberVPL-B1003F-CJ14AA
UPC884951871588
Weight10.00 lbs (4.54 kg)
Voltage400 Volts
Frame Size100 millimeters
Rated Speed4500 rpm
Magnet Stacks3
Feedback18-bit absolute single-turn digital encoder (Hiperface DSL protocol)
ShaftShaft Key
ConnectorSingle SpeedTec DIN connector, right angle, 325° rotatable
Mounting FlangeIEC metric, free mounting holes (type FF)
Factory OptionsStandard
Brake24 Volts DC
Request a Repair

The VPL-B1003F-CJ14AA is a low-inertia servo motor that is manufactured by Allen Bradley a division of Rockwell Automation. The servo motor comes with a voltage of 400 Volts and features frame size of 100 millimeters. The rated speed for the VPL-B1003F-CJ14AA is 4,500 revolutions per minute and comes with three magnet stacks. The feedback type for the VPL-B1003F-CJ14AA is an 18-bit absolute single-turn digital encoder and comes with a shaft key. The VPL-B1003F-CJ14AA also features single speedTEC DIN Connector and a right angle 325-degree rotatable connector. The mounting flange for the VPL-B1003F-CJ14AA is IEC metric free mounting holes and comes as a standard factory option. The brake type for the VPL-B1003F-CJ14AA is 24 Volts DC.

The VPL-B1003F-CJ14AA has been designed and engineered to match the ratings of the Kinetix 5500 drives and features the single cable technology. The module also comes with a high torque to size ratio and it has low rotor inertia. The VPL-B1003F-CJ14AA is a single turn and multiple turn absolute feedback devices. It offers a high energy rare earth magnets and shaft end threaded holes. Through a proper maintenance, the VPL-B1003F-CJ14AA will have an increased lifespan. It is, therefore, important that you follow the proper design and maintenance instructions as per the manufacturer. The VPL-B1003F-CJ14AA and other low inertia servo motors are available with various winding options as matched to the ratings of the Kinetix 5500 drives. The optimized system sizing lowers the cost of the system and improves the energy efficiency.

Revision Part #Also known as
VPL-B1003F-CJ14AA Ser AVPL-B1003F-CJ14AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.