VPL-B1003F-PK12AA

The VPL-B1003F-PK12AA is a servo motor that belongs to the VPL series of low-inertia output Brushless AC synchronous servo motors. This servo motor is installed with high-energy rare-earth magnets that contribute to more efficient performance. It comes with a 100 mm bolt circle diameter (BDC) frame, a 3-inch Magnet stack, motor rated speed of 4500 RPM, and a maximum operating speed of 4750 RPM. It is equipped with an 18-bit resolution, multi-turn, digital absolute encoder that functions as a feedback device for monitoring accurate position. This encoder is capable of Hiperface DSL protocol which is a high-speed communication link between the encoder and servo drive. The VPL-B1003F-PK12AA has a smooth shaft and uses a single SpeedTec DIN connector in right angle orientation and is rotatable up to 325 Degrees. This servo motor has motor rated output power of 1.65 kW (2.21 HP) with rotor inertia output of 0.0000012 kg-m2 (0.00010 lb-in-s2) while torque ratings include 4.18 Nm (37.0 lb-in) continuous stall Torque and 11.15 Nm (99.0 lb-in) Peak stall Torque. This motor is especially compatible with the use of Kinetix 5500 and Kinetix 5700 dual-axis inverters while compatible application areas include Packaging, Converting, Material handling, Electronics assembly, Automotive, and similar applications. The VPL-B1003F-PK12AA is compatible using the 2090 cabling technology from Allen-Bradley. This cable series ensures a fast and secured connection of the supply line to the motor with high resistance to vibration and shock. This servo motor has a standard protection rating of IP50 however, IP65 can be achieved if this servo motor is applied with an appropriate shaft seal and wired with environmentally sealed cable connectors.

The VPL-B1003F-PK12AA is an Allen Bradley Low inertia servo motor that is classified under the VPL servo motors series. The VPL-B1003F-PK12AA features the standard factory options and comes with a IEC metric mounting flange with the free mounting holes featuring the type FF mounting. The VPL-B1003F-PK12AA has a smooth shaft with a feedback type being 18-bit absolute multiple turn digital encoder that supports Hiperface DSL protocol. This motor has a rated speed of 4500 RPM with 100 millimeters frame size, the low inertia servo motor comes with a voltage of 400 Volts. The environmental rating for the VPL-B1003F-PK12AA is an IP50 minimum without the shaft seal and IP66 with the optional shaft seal and used on the environmentally sealed cable connectors. The module comes with the continuous stall torque of 0.46 to 33 N-m and it is compatible with the Kinetix 5000 drives. This brushless AC synchronous servo motor is applicable in different applications including the packaging machinery, the conversion machinery and the applications that are used in the automotive and the metal forming applications. The low inertia Kinetix motors are also available with a high-performance encoder and come with a choice of the single turn and the multiple turn high-resolution feedback. The module also comes with the single cable that eliminates hardware and the wire terminations. The servo motors also come with 24 Volt DC braking system with the choice of the keyed or the keyless shaft. The VPL-B1003F-PK12AA is a compact servo motor that belongs to the VPL series from Allen-Bradley. This servo motor is of a brushless AC synchronous motor type with high-energy rare earth magnets installed that contributes to the efficient operation of this motor. It is compatible for use with the Kinetix 5100 and Kinetix 5700 Servo drives. The VPL has an applicable motor output power of 1.65 Kilowatts or 2.21 Horsepower and maximum rated speed of 4750 RPM. It has a continuous stall torque of 4.18 N-m or 37.0 lb-in, peak stall torque of 11.15 N-m or 99.0 lb-in while the rotor inertia is 0.00012 kg-m2 or 0.0010 lb-in-s2 and weighs 4.45 kilograms or 9.80 pounds. It is a 400 Volt class motor with a bolt circle diameter of 100 millimeters and a magnetic stack length of 3 inches. For position feedback, the VPL-B1003F-PK12AA has a built-in 18-bit absolute multi-turn digital encoder which support Hiperface DSL protocol. This protocol is an industry standard that is used for fast digital communication between the servo motor and the servo drive. This communication is a two-way communication between both components. Additionally, the VPL-B1003F-PK12AA comes with a smooth shaft; however, it does not come with a shaft seal installed. For motor connection, a single SpeedTec DIN connector in right angle orientation is used to connect the motor from external signal wirings. This connector is 325 degrees rotatable for securing connection. It comes with standard free mounting holes for simple installation. Optional components available to this servo motor are an optional shaft seal, 2090 series cable, and external brake mechanism.