Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley VPL Servo Motors VPL-B1003F-PK14AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

VPL-B1003F-PK14AA

|
Need a Specific Revision?

The Allen-Bradley VPL-B1003F-PK14AA servo motor is a low-inertia servo motor from the VPL series. It has an operating voltage rating of 400 Volts and a shaft rotation speed rating of 4500 RPM. The VPL-B1003F-PK14AA low-inertia servo motor’s shaft can also be held at 0 RPM by its built-in 24 Volts DC rated holding brake if necessary, but this brake cannot be used to stop the shaft during operation or as any type of safety or emergency device. This servo motor operates with feedback from a multi-turn digital encoder that supports the Hiperface DSL protocol. The VPL-B1003F-PK14AA low-inertia servo motor can operate at temperatures between 0 and 40 degrees Celsius or 32 and 104 degrees Fahrenheit.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for VPL-B1003F-PK14AA

ManufacturerAllen Bradley
Product TypeLow-inertia Servo Motor
Product LineVPL Servo Motors
Part NumberVPL-B1003F-PK14AA
UPC884951312227
Weight11.63 lbs (5.27 kg)
Voltage400V
Frame Size100 millimeters
Rated Speed4500 RPM
Magnet Stacks3
Feedback18-bit absolute multi-turn digital encoder (Hiperface DSL protocol)
ShaftSmooth
ConnectorSingle SpeedTec DIN connector, right angle, 325° rotatable
Mounting FlangeIEC metric, free mounting holes (type FF)
Factory OptionsStandard
Brake24 Volts DC
Request a Repair

The VPL-B1003F-PK14AA is a low inertia servo motor that is manufactured by Allen Bradley a division of Rockwell Automation. The module comes with a voltage of 400 Volts and features the 100 millimeters frame size. It has a rated speed of 4750 RPM and has up to three magnet stacks. The module features a feedback of 18-bit absolute multiple turning digital encoder or the Hiperface DSL protocol. The module also comes with a smooth shaft and the connector type for the VPL-B1003F-PK14AA is a single speed TEC DIN connector with a right angle 325-degree rotatable connector. The module also features a mounting flange which has the IEC metric with a free mounting hole or the type FF mounting. The module comes with the standard factory features and it is a 24 volts DC braking system servo motor.

The VPL-B1003F-PK14AA comes with an operating temperature as 0 to 50 degrees Celsius with a storage temperature being from -30 to 40 degrees Celsius. The module features a relative humidity 0f 5% to 95% non-condensing with the IP ratings being IP 50 and IP 60. The IP50 minimum without seal and IP66 with an optional shaft seal and uses the environmentally sealed cable connectors. The shock acceleration resistance for the VPL-B1003F-PK14AA is up to 20 grams with a shock duration of 6 milliseconds. The vibration acceleration for the VPL-B1003F-PK14AA is 2.5 grams. The VPL-B1003F-PK14AA offers real-time motor performance information to the control system through a digital feedback device.

Revision Part #Also known as
VPL-B1003F-PK14AA Ser AVPL-B1003F-PK14AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.