VPL-B1003T-PJ12AA

The VPL-B1003T-PJ12AA low-inertia rotary motion servo motor is part of the Kinetix VPL series by Allen-Bradley/Rockwell Automation. The VPL-B1003T-PJ12AA servo motor can reach a maximum speed of 4500 RPM and it features a rotor inertia of 0.00012 kilograms per square meter. In addition to that, the rated power output of the VPL-B1003T-PJ12AA servo motor is 1.77 Horsepower or 2.37 kilowatts. The peak stall torque of the motor is 11.15 N-m while the continuous stall torque is 4.18 N-m. The 100-millimeter frame size refers to the bolt circle diameter (BCD) of the motor. The servo motor also features an 18-bit absolute multi-turn digital encoder. This permanent magnet rotary servo motor is intended for operation on 460 Volts AC and it is designed for operation with Allen-Bradley drives from the Kinetix 5500 and 5700 series. The motor that weighs only 4.5 kilograms includes a shaft key and a single rotatable connector. Also, the VPL-B1003T-PJ12AA servo motor is equipped with the standard factory control options and it has an IEC metric mounting flange that comes with type FF free mounting holes.

The Allen-Bradley VPL-B1003T-PJ12AA is a Low-inertia servo motor that is part of the VPL series. This servo motor has a compact size and especially designed for use in a variety of industrial applications within Packaging, Converting, Material handling, Electronics assembly and automotive processes. To fully utilize this servo motor, it is paired to an Allen-Bradley Servo Drive such as Kinetix 5700 and Kinetix 5500 drives using servo cables such as 2090-CSxM1xx-xxAA/AFxx (TPE) cables or 2090-CSxM1xx-xxVA/LFxx (PVC and PUR) cables.

The VPL-B1003T-PJ12AA is essentially a Brushless AC synchronous servo motor. It is designed with the capability of implementing Allen-Bradley’s single cable technology using the 2090 series. It comes with an integral support for Hiperface protocol and primarily features low rotor inertia and capable of reaching up to 6750 RPM. It is installed with an 18-bit absolute multi-turn digital encoder which support the Hiperface DSL protocol. This built-in encoder functions as the motor’s speed feedback.

The VPL-B1003T-PJ12AA is a 400 Volt class motor with an output power of 2.37 Horsepower or 1.77 Kilowatts. It has a continuous stall torque of 4.18 Newton-meters (37.0 lb-in); peak stall torque of 11.15 Newton-meters (99.0 lb-in) and an output speed of up to 4750 RPM. It has a rotor inertia output of 0.00012 kg-m2 (0.0010 lb-in-s2). This motor weighs 4.45 kilograms (9.80 pounds).

The VPL-B1003T-PJ12AA does not come with a shaft seal installed. With this, user may separately acquire the appropriate shaft seal for this motor which is the MPL-SSN-A3B3. Shaft seals are primary used to prevent process mediums or material, from entering in motor internals. Additionally, shaft seals especially nitril made seals comes with a lubricant to reduce motor wear and tear.