VPL-B1152F-PJ14AA

The VPL-B1152F-PJ14AA is a Kinetix VP Low-Inertia Servo Motor manufactured by Allen-Bradley. This brushless servo motor is rated at 400 Volts, 4500 RPM, and 1.88 Horsepower. It is optimized to match the ratings of the Kinetix 5500 and Kinetix 5570 Servo drives, and it has a 115 frame size bolt circle diameter, a 2-magnet stack length, and an 18-bit absolute multi-turn high-resolution digital encoder with the Hiperface DSL protocol. The VPL-B1152F-PJ14AA Kinetix Servo Motor is suitable for a wide range of applications, including metal forming and material assembly. It features a single cable solution with 1 SpeedTec DIN connector. This cable houses both its power and communication cables. The VPL-B1152F-PJ14AA Servo Motor comes with a 24 Volts DC brake and other standard factory options, including a shaft key.

Shields may be used to protect parts of the VPL-B1152F-PJ14AA Servo Motor, such as its housing, seals, junctions, connectors, and its shaft from fluids and impurities that may reduce its performance. Allen-Bradley recommends periodic replacement of these shields to ensure that they do not wear off and leave motor parts vulnerable. With proper design and maintenance, the VPL-B1152F-PJ14AA Servo Motor offers reliable operation for many years. Its installation requires torsionally rigid coupling or reinforced timing belts in order to reduce the frequency at which its dynamic performance may cause couplings and belts and timing belts to loosen or slip and to prevent any damage or malfunctioning that may result from this. While installing the VPL-B1152F-PJ14AA Servo Motor, the protective cap on the servo motor’s shaft can be easily removed by hand or with a screwdriver. Removing it with a hammer may cause some damage to the motor.