VPL-B1153F-PJ12AA

The Allen-Bradley VPL-B1153F-PJ12AA is a low-inertia servo motor from the VPL servo drive product family. This servo drive is especially designed for used with the Kinetix 5500 servo drives and Kinetix 5700 dual axis inverter. This servo motor is made of brushless AC synchronous servo motors and composed of rotor poles made with rare-earth magnets for faster acceleration and high Torque to size ration. Additionally, this servo motor supports Hiperface DSL encoder protocol for faster transmission of motor position to the servo drive.

This motor uses a SpeedTec DIN connector which rotates up to 325° for connection flexibility. It has a minimum of IP55 protection rating which varies depending on the orientation of the motor shaft however, when installed with an appropriate shaft seal, the servo motor’s protection rating meets IP66 which prevents entry of industrial contaminants and direct contact to process materials, preventing damage and maximizing the operation lifespan of the motor. Appropriate shaft seal for use with servo motor is MPL-SSN-A4B4 . Shaft seals must be serviced every 3 months minimum, but not exceeding 12 months. This motor carries certifications and UL Recognized components to applicable UL and CSA standards. CE marked for all applicable directive.

The Bradley VPL-B1153F-PJ12AA is a 400V class motor with 115 mm bolt circle diameter (BDC), 3-inch Magnet stack length, rated speed of 4500 RPM. It uses an 18-bit high-resolution absolute multi-turn encoder for reporting the motors degree of rotation and number of rotation. This motor is ideally used in Packaging, Converting, Material handling, Electronic assembly and Automotive applications.

The Allen-Bradley VPL-B1153F-PJ12AA permanent magnet rotary servo motor has a voltage class of 400 Volts and a rated speed of 4500 RPM. This motor contains a frame size of 115 millimeters and a magnet stack length of 3. The Allen-Bradley VPL-B1153F-PJ12AA permanent magnet rotary servo motor features a shaft key and an encoder with 18-bit absolute multi-turn Hiperface DSL protocol. This motor has a single speed-tec DIN connector and it has no brakes. When it comes to factory options, it has a standard configuration. In order to prolong the life of the Allen-Bradley VPL-B1153F-PJ12AA permanent magnet rotary servo motor, it is recommended to provide additional shields that impede contact with liquids and to inspect the motor parts regularly in order to replace those parts that show excessive wear. It is also important to use shielded cables, to isolate power transformers, and to ground all the equipment into a single-point parallel ground system. This can considerably reduce electromagnetic interference and thus help the motor have better functioning. Users must ensure that the motor is properly aligned and that all its connectors are in place. Enough space must be left around the servo motor so that it can dissipate heat and stay within its operating temperature range, which ranges from 0 to 40 degrees Celsius.