VPL-B1153F-PK14AA

The VPL-B1153F-PK14AA is a Low-Inertia AC Servo Motor designed and manufactured by Allen-Bradley. This motor is mainly applied in the industrial applications that use machine tooling, dosing, packaging, and precise positioning during their segments of work. The VPL-B1153F-PK14AA has the speed rating of 4500 RPM, and its armature voltage is 400 Volts AC. It is factory supplied with an 18-bit multi-turn feedback encoder, which gives absolute position feedback within 4096 turns. The VPL-B1153F-PK14AA is compatible with Allen-Bradley’s Kinetix 5500 servo drives. The servo motor’s frame size is 115 millimeters, its stack length is 3 inches, and it can be fixed over type FF mounting holes. The Allen-Bradley VPL-B1153F-PK14AA features 24 Volts DC brake to hold the motor and the load attached to it stopped when there is a need for it. This feature, and the others, like single angled and rotatable connector, makes this motor easy to use and to install. During the installation, use shielded cables and ground the device. This is important in order to reduce electromagnetic interference and help the servo motor to achieve better performance. Make a note to leave enough space around the motor for it to dissipate heat easily and to stay within its operating temperature range, which is 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit). The device incorporates high-quality bearings which are projected to last more than 20,000 working hours.

The Allen-Bradley VPL-B1153F-PK14AA is a Kinetix VPL series servo motor. Servo motors such as the VPL-B1153F-PK14AA are primarily used to implement motion and position control. It is paired with a servo drive such as the Kinetix 5700 and Kinetix 5100 servo drives.

The VPL-B1153F-PK14AA is a 400 Volt class servo motor. It is essentially a Brushless AC synchronous servo motor and comes with a minimum of IP50 protection rating. It can meet up to IP66 protection if the appropriate shaft seal and environmentally sealed cables are used with this motor.

The VPL-B1153F-PK14AA uses high-energy rare magnets to aid in the generation of low inertia output. It comes with an integrated 18-bit absolute multi-turn digital encoder that utilizes Hiperface DSL protocol. This servo motor has a rated speed output of 5000 RPM and delivers an applicable motor output of 2.03 Kilowatts or 3.08 Horsepower. For motor connections, the VPL-B1153F-PK14AA uses a Single SpeedTec DIN connector in right angle orientation that can be rotated up to 325 degrees. This type of connector simplifies termination of signal and power to the motor as well as provides tight connection even in high vibration and shock applications such as moving carriages and rotating objects.

The VPL-B1153F-PK14AA come with an internal 24 Volt DC holding brake and comes with IEC metric holes, providing standard installation. Option modules available to this module include Safety Integrated Level (SIL2) rated absolute multi-turn encoder. Similarly, an optional shaft seal may be purchased and used with this servo motor to protect the motor from wear and tear as well as prevent entry of process material and medium from entering the internal parts of the motor.