VPL-B1303F-CK12AA

The Kinetix VP-series VPL-B1303F-CK12AA low-inertia servo motor is made and developed by Allen-Bradley/Rockwell Automation. The motor has high-energy permanent magnets and it can be adjusted to meet the requirements of servo drives from the Allen-Bradley Kinetix 5500 and 5700 product series. Every motor from this product series has a specific option included and the series offers a variety of different models to meet the requirements of demanding applications. The VPL-B1303F-CK12AA servo motor has the standard IEC 72-1 marked mounting dimensions and it does not require any additional equipment for installation. The servo motor includes certifications from the CE, C-Tick, CSA, and UL standards. The series offers single-turn and multi-turn absolute feedback options along with optional shaft seals that increase the environmental rating of the servo motor. Depending on the installed shaft seal, the motors from this series can have an IP 50 or IP 66 ingress protection rating. The motor features a shaft-end threaded hole and a SpeedTec DIN single connector that rotates anywhere within 325 degrees.

Also, the Allen-Bradley VPL-B1303F-CK12AA servo motor provides great connectivity through premium industrial-grade cables that are available in various lengths. The cables can meet different requirements with available lengths between 1 and 90 meters (3.2 and 295 feet). This Allen-Bradley branded servo motor has rotor inertia of 0.0004 kilograms per square meter and a rated power output of 2.82 kilowatts or 3.78 Horsepower. The VPL-B1303F-CK12AA servo motor supports a maximum speed of 4000 RPM and its continuous stall torque and peak stall torque are 8.8/20.72 N-m, respectively. The motor weighs 7.54 kilograms (16.6 pounds) and it comes with a 130-millimeter frame. It is important to mention that the VPL-B1303F-CK12AA servo motor includes a feedback functionality through an 18-bit absolute single-turn digital encoder. This encoder ensures absolute position feedback within 1 turn and it features 262,144 counts per revolution. The motor incorporates the Hiperface DSL encoder protocol that is standard for this type of component. Also, the motor is equipped with a smooth shaft and standard factory control options.