Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley VPL Servo Motors VPL-B1306F-PK14AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

VPL-B1306F-PK14AA

|
Need a Specific Revision?

The Allen-Bradley VPL-B1306F-PK14AA servo motor is a VPL series low-inertia servo motor with a voltage rating of 400 Volts. Its shaft can rotate at a maximum speed of 4500 RPM or it can be held at 0 RPM by the motor’s built-in holding brake in certain applications until the servo motor reaches a specific torque rating. The VPL-B1306F-PK14AA low-inertia servo motor comes with an 18-bit absolute multi-turn digital encoder that supplies it with feedback. It can operate in an ambient temperature range from 32 to 104 degrees Fahrenheit and it can be stored or transported at ambient temperatures between -22 and 104 degrees Fahrenheit. The VPL-B1306F-PK14AA low-inertia servo motor features 6 permanent magnet stacks that reduce its inertia.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for VPL-B1306F-PK14AA

ManufacturerAllen Bradley
Product TypeLow-inertia Servo Motor
Product LineVPL Servo Motors
Part NumberVPL-B1306F-PK14AA
Weight12.00 lbs (5.44 kg)
Voltage400V
Frame Size130 mm
Rated Speed4500 rpm
Magnet Stacks6
Feedback18-bit absolute multi-turn digital encoder (Hiperface DSL protocol)
ShaftSmooth
ConnectorSingle SpeedTec DIN connector, right angle, 325° rotatable
Mounting FlangeIEC metric, free mounting holes (type FF)
Factory OptionsStandard
Brake24V DC
Request a Repair

A product of Allen-Bradley, the VPL-B1306F-PK14AA servo motor is a low-inertia servo motor classified under the VPL servo motor series. The servo motor features a power voltage rating of 400 Volts AC while the frame size is 130 millimeters. The VPL-B1306F-PK14AA servo motor features a rated motor voltage of 4500 revolutions per minute and it comes with 6 magnet stacks. With the IEC metric mounting flange, the VPL-B1306F-PK14AA servo motor comes with a keyless shaft and the SpeedTec right-angle DIN connector type. The Allen-Bradley motor also features the 24 Volts DC holding brake type and it features the 18-bit multi-turn feedback encoder. The Allen-Bradley servo motor features a 130-millimeter bolt circle frame size.

The Allen-Bradley low-inertia servo motors are commonly used in the automotive, electronic assembly, material handling, converting, and packaging industries. For enhanced motor performance, the VPL-B1306F-PK14AA servo motor comes with integrated safety over the EtherNet/IP networks. The unit is also designed to have a small footprint with optimized power density. It features a single cable with a feedback motor brake and the motor power all in a single cable and equipped with a quick 1-turn connector. For more efficiency, this Allen-Bradley servo motor features winding alternatives that allowing it to match the ratings of an application. The VPL-B1306F-PK14AA servo motor has been designed to include the digital feedback device for real-time motor performance information to be displayed on the control system. The unit also has the ability to run servo motors and induction motors all in a single drive platform. It comes with flexible power connectivity that provides multiple ways to operate the system.

Revision Part #Also known as
VPL-B1306F-PK14AA Ser AVPL-B1306F-PK14AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.