VPL-B1652F-PJ14AA

The VPL-B1652F-PJ14AA is a low-inertia servo motor device by Allen-Bradley. This motor belongs to the Allen-Bradley VPL series of servo motors. Inside of a 165 millimeters circular frame, the device is built using E-windings. There are 2 magnetic stacks inside this motor and a shaft key is present. It has a with a speed of 4500 revolutions per minute and operates at 400 Volts of armature voltage supply. It can be mounted using the provided IEC grade metric flange mounting which comes with free mounting holes. It comes with a 24 Volts DC brake for braking purposes. The motor is built from stainless steel and fasteners. It has a maximum running temperature of 40 degrees Celsius and a minimum running temperature of 0 degrees Celsius. The environment should be relatively humid (with non-condensing humidity). This servo motor device is resistant to dust and low water pressure. The VPL-B1652F-PJ14AA can rotate up to 325 degrees and comes with a SpeedTec right angle DIN connector for connection purposes. The device comes with an enhanced feedback system with an 18-bit digital encoder. It can calculate real-time performance and pass this information to the users by using the feedback device. Using this information, many quick decisions can be taken as needed in real time and during operation. This servo motor device has been optimized to suit the demanding needs of various high-performance motion systems. Since it is an industrial grade device, it is being widely used in assembly plants and the material handling industry. Different precautions should be taken before installing the VPL-B1652F-PJ14AA in a factory environment. The surrounding area should be kept clean and it should be well-ventilated for the best possible heat dissipation. The environment should also be made free from all electrostatic discharges and from electromagnetic interference because these degrade the performance of the device. The VPL-B1652F-PJ14AA meets different standards like the C-Tick, CCC, and the KC standards.

The VPL-B1652F-PJ14AA is an Allen-Bradley servo motor that is part of the VPL series of low-inertia, servo motors. Servo motors, such as the VPL-B1652F-PJ14AA are motors that utilize feedback devices to monitor and control the position based on the rotation of the motor. Additionally, the VPL-B1652F-PJ14AA, being part of the VPL series is a compact and small servo motor, ideally used in application with limited space available. This motor is specifically manufactured for use in applications such as packaging, converting, material handling, electronics assembly, and automotive applications.

The VPL-B1652F-PJ14AA utilizes a built-in 18-bit high-resolution encoder for positional feedback. This encoder supports the industry standard Hiperface protocol for implementing high-speed digital data exchange between the motor and the partner servo drive for faster response and accurate control. The VPL-B1652F-PJ14AA is especially optimized for use with Allen-Bradley’s Kinetix 5500 and Kinetix 5700 Dual-axis inverters. Optional encoders are also available to this servo motor such as single turn, multi-turn encoders. For safety compliance, specifically SIL 2 rating, the VPL-B1652F-PJ14AA servo motor is also compatible for use with a SIL2 rated encoder with 23-bit resolution for 8,388,608 counts per revolution, multi-turn absolute position feedback, or 18-bit resolution for 262,144 multi-turn absolute position feedback.

The VPL-B1652F-PJ14AA is a 400 Volt class servo motor with a maximum operating speed of 4500 RPM. It has an output power of 4.77 Kilowatts or 6.40 Horsepower and a rotor inertia of 0.00147 kg-m2 (0.013 lb•in•s2). This servo motor also used SpeedTec connectors for fast and secure wiring even in high-vibration application and shock installation areas. Optionally, it may also use connection cables from the 2090 series to implement single cable technology.