Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley VPL Servo Motors VPL-B1653C-PJ14AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

VPL-B1653C-PJ14AA

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation VPL-B1653C-PJ14AA servo motor is a VPL series low-inertia brushless servo motor. It operates with a voltage class rating of 400 Volts and a shaft speed rating of 2500 RPM. The VPL-B1653C-PJ14AA low-inertia brushless servo motor also operates with feedback that it derives from a multi-turn type of encoder with the Hiperface DSL protocol. It uses 3 permanent magnets stacks to operate reliably at low inertia levels. The VPL-B1653C-PJ14AA low-inertia brushless servo motor comes with a 24 Volts DC rated holding brake that can hold its shaft at 0 RPM until it reaches a specified torque rating.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for VPL-B1653C-PJ14AA

ManufacturerAllen Bradley
Product TypeLow-inertia Servo Motor
Product LineVPL Servo Motors
Part NumberVPL-B1653C-PJ14AA
UPC885630556598
Weight80.00 lbs (36.29 kg)
Voltage400V
Frame Size165 mm
Rated Speed2500 rpm
Magnet Stacks3
Feedback18-bit absolute multi-turn digital encoder (Hiperface DSL protocol)
ShaftShaft Key
ConnectorSingle SpeedTec DIN connector, right angle, 325° rotatable
Mounting FlangeIEC metric, free mounting holes (type FF)
Factory OptionsStandard
Brake24V DC
Request a Repair

Designed by Allen-Bradley, the VPL-B1653C-PJ14AA servo motor is a low-inertia servo motor. The VPL-B1653C-PJ14AA servo motor falls under the VPL servo motors series and features a power voltage rating of 480 volts. The Allen-Bradley VPL-B1653C-PJ14AA servo motor also comes with a frame size of 165 millimeters and a bolt circle frame, with the rated motor speed of 2500 revolutions per minute. Featuring 3 magnet stacks, The VPL-B1653C-PJ14AA servo motor comes with the 24 Volts DC brake type. The Allen-Bradley servo motor runs on the SpeedTec right-angle DIN connectors with a multiple-turn 18-bit feedback encoder type. The unit also comes with the keyed shaft type.

The VPL-B1653C-PJ14AA servo motor is prone to electromagnetic interference, which is also known as EMI noise. The EMI noise causes the motor to have poor performance and poor output. In order to ensure that the VPL-B1653C-PJ14AA servo motor delivers optimal performance, it is important to ensure that the EMI noise is reduced to the minimum. Therefore, ensure that the VPL-B1653C-PJ14AA servo motor’s AC power lines are isolated from the power transformers or make use of line filters or add shielded cabling. Avoid routing the power cables over the open ducts that run on the servo drives. For improved electromagnetic compatibility, use proper cable routing and careful cable assembly. The VPL servo motor also comes with the Hiperface DSL function which ensures the safety of the feedback sensor. For optimal performance, follow the manufacturer’s installation guidelines and safety practices. Avoid using the VPL-B1653C-PJ14AA servo motor if it is not mounted and make sure that all the loose connections are fastened before powering the unit on.

Revision Part #Also known as
VPL-B1653C-PJ14AA Ser AVPL-B1653C-PJ14AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.