Y-1003-2-H00-X103

The Y-1003-2-H00-X103 is a brushless servo motor that has been designed by Allen-Bradley and, according to its specifications and design, has been included in the Y series. The Allen-Bradley Y-1003-2-H00-X103 brushless servo motor is a light industrial motor type that features a standard optical encoder line count of 2000 and a voltage rating of 115 Volts AC. The Allen-Bradley Y-1003-2-H00-X103 brushless servo motor has a standard brake and it has a standard enclosure. It is utterly important to avoid the exposure to corrosive environments and the contact with liquids. The desirable environmental conditions for the Allen-Bradley Y-1003-2-H00-X103 brushless servo motor are an operating temperature range of 0 to 40 degrees Celsius and a relative humidity of 5 to 95 percent. This servo motor can also be stored in environments with a temperature of -30 to 70 degrees Celsius

Before installing the servo motor, its frame, the output shaft and mounting pilots must be examined, in case there is any defect. The servo motor should not be open. During the installation, each mechanical connection requires a torsionally coupling or a reinforced belt. Once operating, with the high vibrations produced by the motor these can be loosen and that is the main reason why users must be aware of the state of the status of these connections. The Allen-Bradley Y-1003-2-H00-X103 brushless servo motor and all its equipment must be grounded using a parallel ground system in order to reduce electrical noise and interference. Power and signal cables must be shielded and separated. The maximum radial load of the Allen-Bradley Y-1003-2-H00-X103 brushless servo motor is 10 Kilograms and the maximum axial load with radial load is 3 Kilograms.