Y-2012-1-H04AA

The Allen-Bradley Y-2012-1-H04AA is a servo motor that is used to drive machinery. It is part of the Y-Series of Brushless Servo Motors that are typically applied for material handling. It is also used for specialty machinery applications, postal sorting, and medical and laboratory equipment operations. The Y-2012-1-H04AA motor uses a 2012 frame size and has a 115 Volt drive input voltage. The length of this servo motor is 191.5 millimeters and its torque capacity is 1.35 N-m. This Y-Series motor, the Y-2012-1-H04AA, utilizes high-level neodymium magnets. These magnets are known to supply low inertias for speedy accelerations. The Y-Series motors also range in constant torque capacity from 1.5 to 22 pounds on an inch. (0.17 to 2.5 N-m). They reach speed rates of up to 4,500 RPM. These excellent torque-to-size proportions of Y-Series motors make them a great option for combination with ULTRA 100 & 200 drives. Additionally, the Y-2012-1-H04AA is a three-phase motor that holds an incremental encoder count of 2,000 lines per revolution. It weighs 3.09 kilograms and has a standard design with a 24 Volt DC holding brake option. This brake is a spring-set type that is built to hold the motor shaft. It is released when the voltage is put on to the brake coil. The power requirement of Y-2012-1-H04AA motor is 230 Volts AC and it has a rated speed of 4,500 RPM. Before installing the Y-2012-1-H04AA, it must be carefully removed from its shipping container and then examined for any damage. The front output shaft, motor frame, and mounting pilot should all be inspected for any damage. Failure to follow these safety routines may result in component malfunction or impairment.