140G-G6C3-D10 | Allen Bradley PLC 140G MCB

140G-G6C3-D10

140G-G6C3-D10

Revisions: Ser A 
Description: The Allen-Bradley 140G-G6C3-D10 circuit breaker is a molded case circuit breaker that supports fixed thermal tripping and fixed magnetic tripping. It has been manufactured by Allen-Bradley/Rockwell Automation as a member of the Bulletin 140G series. The 140G-G6C3-D10 molded case circuit breaker operates with a thermal trip rating of 100 Amps and with a magnetic trip rating of 1000 Amps. It is often used as a line protection device in control panels. The 140G-G6C3-D10 molded case circuit breaker is easy to mount because it supports all kinds of mounting orientations and because it supports DIN Rail mounting.
Rated 4.5 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 140G-G6C3-D10

Add more parts to quote

Description: The Allen-Bradley 140G-G6C3-D10 circuit breaker is a molded case circuit breaker that supports fixed thermal tripping and fixed magnetic tripping. It has been manufactured by Allen-Bradley/Rockwell Automation as a member of the Bulletin 140G series. The 140G-G6C3-D10 molded case circuit breaker operates with a thermal trip rating of 100 Amps and with a magnetic trip rating of 1000 Amps. It is often used as a line protection device in control panels. The 140G-G6C3-D10 molded case circuit breaker is easy to mount because it supports all kinds of mounting orientations and because it supports DIN Rail mounting.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 140G-G6C3-D10.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 9 reviews

    Technical Specifications for 140G-G6C3-D10

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-G6C3-D10
Product TypeMolded Case Circuit Breaker
FrameG
Amps125
Interrupting Rating65 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range100 A
Rated Insulation Voltage800 V
Rated Impulse Withstand Voltage8 kV
Weight2.42 lb
Thermal Trip100 A
Magnetic Trip1000 A
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-G6C3-D10
Product TypeMolded Case Circuit Breaker
FrameG
Amps125
Interrupting Rating65 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range100 A
Rated Insulation Voltage800 V
Rated Impulse Withstand Voltage8 kV
Weight2.42 lb
Thermal Trip100 A
Magnetic Trip1000 A
s

About 140G-G6C3-D10

The Allen-Bradley 140G-G6C3-D10 circuit breaker is a molded case circuit breaker with a wide variety of applications in buildings and homes, as well as in industrial plants. Its interrupting capacity is 65 kA at 480 Volts AC, and it can work with voltages of up to 690 Volts AC or 500 Volts DC. The current at which this device disconnects the input and output contacts (the trip state) is 100 Amps, and the maximum continuous current that can flow through the device is 125 Amps. When tripped, the unit must be manually reset by pulling the lever on the front side to OFF state and then to ON state. The device can be integrated into industrial automation monitoring systems with an auxiliary contacts accessory that provides a digital display (ON/OFF) of the status of the device. An alarm contact can be integrated into the circuit breaker to indicate the trip status of the circuit breaker. 



The Allen-Bradley 140G-G6C3-D10 circuit breaker can be found in the trip state after it detects a short-circuit, after overcurrent detection, or when the users manually press the test button on the molded case circuit breaker. The 140G-G6C3-D10 circuit breaker is calibrated to respond to currents greater than 100 Amps at 40 degrees Celsius. This current value is reduced if the device operates at higher temperatures than this one. Also, this type of circuit breaker must be derated for voltage and for its interrupting rating at altitudes above 2000 meters. The dimensions of the device are 76 millimeters by 130 millimeters by 70 millimeters. The 140G-G6C3-D10 circuit breaker is manufactured by Allen-Bradley which guarantees the operability and functionality of the circuit breaker with worldwide technical support.



Technical Description of 140G-G6C3-D10

The Allen-Bradley 140G-G6C3-D10 Molded Case Circuit Breaker has a G Frame and 125 Amps. It also has a 65 kA Interrupting Rating and 3 Poles.

Repair Services for 140G-G6C3-D10

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-G6C3-D10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 140G-G6C3-D10

Please refer to the manual for more information about the 140G-G6C3-D10 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-G6C3-D10 Ser A
140G-G6C3-D10/A, Series A, Rev A Request Quote
Common misspellings:
  • l40G-G6C3-D10
  • 1A0G-G6C3-D10
  • 14oG-G6C3-D10
  • 140G-G6C3-Dl0
  • 140G-G6C3-D1o
  • 140GG6C3D10

Dimensions For 140G-G6C3-D10

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 140G-G6C3-D10

Resolutions For 140G-G6C3-D10

About

Technical Specifications for 140G-G6C3-D10

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-G6C3-D10
Product TypeMolded Case Circuit Breaker
FrameG
Amps125
Interrupting Rating65 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range100 A
Rated Insulation Voltage800 V
Rated Impulse Withstand Voltage8 kV
Weight2.42 lb
Thermal Trip100 A
Magnetic Trip1000 A
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-G6C3-D10
Product TypeMolded Case Circuit Breaker
FrameG
Amps125
Interrupting Rating65 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range100 A
Rated Insulation Voltage800 V
Rated Impulse Withstand Voltage8 kV
Weight2.42 lb
Thermal Trip100 A
Magnetic Trip1000 A

About 140G-G6C3-D10

The Allen-Bradley 140G-G6C3-D10 circuit breaker is a molded case circuit breaker with a wide variety of applications in buildings and homes, as well as in industrial plants. Its interrupting capacity is 65 kA at 480 Volts AC, and it can work with voltages of up to 690 Volts AC or 500 Volts DC. The current at which this device disconnects the input and output contacts (the trip state) is 100 Amps, and the maximum continuous current that can flow through the device is 125 Amps. When tripped, the unit must be manually reset by pulling the lever on the front side to OFF state and then to ON state. The device can be integrated into industrial automation monitoring systems with an auxiliary contacts accessory that provides a digital display (ON/OFF) of the status of the device. An alarm contact can be integrated into the circuit breaker to indicate the trip status of the circuit breaker. 



The Allen-Bradley 140G-G6C3-D10 circuit breaker can be found in the trip state after it detects a short-circuit, after overcurrent detection, or when the users manually press the test button on the molded case circuit breaker. The 140G-G6C3-D10 circuit breaker is calibrated to respond to currents greater than 100 Amps at 40 degrees Celsius. This current value is reduced if the device operates at higher temperatures than this one. Also, this type of circuit breaker must be derated for voltage and for its interrupting rating at altitudes above 2000 meters. The dimensions of the device are 76 millimeters by 130 millimeters by 70 millimeters. The 140G-G6C3-D10 circuit breaker is manufactured by Allen-Bradley which guarantees the operability and functionality of the circuit breaker with worldwide technical support.



Technical Description of 140G-G6C3-D10

The Allen-Bradley 140G-G6C3-D10 Molded Case Circuit Breaker has a G Frame and 125 Amps. It also has a 65 kA Interrupting Rating and 3 Poles.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-G6C3-D10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-G6C3-D10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 140G-G6C3-D10 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-G6C3-D10 Ser A
140G-G6C3-D10/A, Series A, Rev A Request Quote

Common misspellings:
  • l40G-G6C3-D10
  • 1A0G-G6C3-D10
  • 14oG-G6C3-D10
  • 140G-G6C3-Dl0
  • 140G-G6C3-D1o
  • 140GG6C3D10
PDF