140G-H0F3-C80 | Allen Bradley PLC 140G MCB

140G-H0F3-C80

140G-H0F3-C80

Revisions: Ser A 
Description: The 140G-H0F3-C80 molded case circuit breaker is an Allen-Bradley/Rockwell Automation Bulletin 140G series molded case circuit breaker with a Size H frame. It is a thermal/magnetic circuit breaker that supports adjustable thermal and magnetic trip ratings. The 140G-H0F3-C80 molded case circuit breaker’s supported thermal trip ratings are 56 to 80 Amps while its supported magnetic trip ratings are 400 to 800 Amps. It is built with 3 poles and it can be mounted on a DIN Rail. The 140G-H0F3-C80 molded case circuit breaker is designed to operate continuously with an 80% load.
Rated 5 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 140G-H0F3-C80

Add more parts to quote

Description: The 140G-H0F3-C80 molded case circuit breaker is an Allen-Bradley/Rockwell Automation Bulletin 140G series molded case circuit breaker with a Size H frame. It is a thermal/magnetic circuit breaker that supports adjustable thermal and magnetic trip ratings. The 140G-H0F3-C80 molded case circuit breaker’s supported thermal trip ratings are 56 to 80 Amps while its supported magnetic trip ratings are 400 to 800 Amps. It is built with 3 poles and it can be mounted on a DIN Rail. The 140G-H0F3-C80 molded case circuit breaker is designed to operate continuously with an 80% load.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 140G-H0F3-C80.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 13 reviews

    Technical Specifications for 140G-H0F3-C80

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H0F3-C80
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating100 kA
Protection TypeAdjust Thermal/ Adjust Magnetic
Current Range80 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H0F3-C80
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating100 kA
Protection TypeAdjust Thermal/ Adjust Magnetic
Current Range80 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
s

About 140G-H0F3-C80

The 140G-H0F3-C80 molded case circuit breaker with an adjustable thermal-magnetic protection unit or trip unit is a high-performance circuit breaker from the Allen-Bradley 140G molded case circuit breaker series designed for complete short-circuit and thermal overcurrent protection to a wide range of industrial control panel applications. This circuit breaker belongs to the H Frame breaker series, and it is designed for both HACR (Heating, Air-Conditioning, and Refrigeration) and reverse feed use. The 140G-H0F3-C80 circuit breaker, like all H Frame breakers, is rated at 125 Amps (the maximum breaker rating), but it has a continuous current rating of 80 Amps and it is suitable for 80 Amps or lower-rated applications. The 140G-H0F3-C80 circuit breaker has a maximum voltage rating of 600 Volts AC, which makes it suitable for control applications with 230, 460, 575, and 600 Volts AC line input ratings. It has a maximum breaking capacity rating of 100 Kilo Volt-Amps, and a maximum impulse voltage withstand rating of 8 Kilovolts.





The 140G-H0F3-C80 circuit breaker has a thermal trip rating that is adjustable from 56 to 80 Amps, and an adjustable magnetic trip rating from 400 to 800 Amps (10x the breaker rating). The 140G-H0F3-C80 circuit breaker has 3-pole wiring with the bolt-on type of line and load side terminals, and it comes with a standard 1-meter pig-tail wiring terminal for internal accessory options. The 140G-H0F3-C80 circuit breaker is rated for 80% efficiency at a continuous load at 40 degrees Celsius, and like all 140G thermal-magnetic circuit breakers, it is very sensitive to ambient temperature changes above 40 degrees Celsius. The 140G-H0F3-C80 circuit breaker is CE marked and CCC and CSA certified, and it has an approximate shipping weight of 2.65 pounds.



Technical Description of 140G-H0F3-C80

The Allen-Bradley 140G-H0F3-C80 Molded Case Circuit Breaker has a H Frame and 125 Amps. It also has a 100 kA Interrupting Rating and 3 Poles.

Repair Services for 140G-H0F3-C80

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H0F3-C80. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 140G-H0F3-C80

Please refer to the manual for more information about the 140G-H0F3-C80 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-H0F3-C80 Ser A
140G-H0F3-C80/A, Series A, Rev A Request Quote
Common misspellings:
  • l40G-H0F3-C80
  • 1A0G-H0F3-C80
  • 14oG-H0F3-C80
  • 140G-HoF3-C80
  • 140G-H0F3-Cb0
  • 140G-H0F3-C8o
  • 140GH0F3C80

Dimensions For 140G-H0F3-C80

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 140G-H0F3-C80

Resolutions For 140G-H0F3-C80

About

Technical Specifications for 140G-H0F3-C80

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H0F3-C80
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating100 kA
Protection TypeAdjust Thermal/ Adjust Magnetic
Current Range80 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H0F3-C80
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating100 kA
Protection TypeAdjust Thermal/ Adjust Magnetic
Current Range80 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.

About 140G-H0F3-C80

The 140G-H0F3-C80 molded case circuit breaker with an adjustable thermal-magnetic protection unit or trip unit is a high-performance circuit breaker from the Allen-Bradley 140G molded case circuit breaker series designed for complete short-circuit and thermal overcurrent protection to a wide range of industrial control panel applications. This circuit breaker belongs to the H Frame breaker series, and it is designed for both HACR (Heating, Air-Conditioning, and Refrigeration) and reverse feed use. The 140G-H0F3-C80 circuit breaker, like all H Frame breakers, is rated at 125 Amps (the maximum breaker rating), but it has a continuous current rating of 80 Amps and it is suitable for 80 Amps or lower-rated applications. The 140G-H0F3-C80 circuit breaker has a maximum voltage rating of 600 Volts AC, which makes it suitable for control applications with 230, 460, 575, and 600 Volts AC line input ratings. It has a maximum breaking capacity rating of 100 Kilo Volt-Amps, and a maximum impulse voltage withstand rating of 8 Kilovolts.





The 140G-H0F3-C80 circuit breaker has a thermal trip rating that is adjustable from 56 to 80 Amps, and an adjustable magnetic trip rating from 400 to 800 Amps (10x the breaker rating). The 140G-H0F3-C80 circuit breaker has 3-pole wiring with the bolt-on type of line and load side terminals, and it comes with a standard 1-meter pig-tail wiring terminal for internal accessory options. The 140G-H0F3-C80 circuit breaker is rated for 80% efficiency at a continuous load at 40 degrees Celsius, and like all 140G thermal-magnetic circuit breakers, it is very sensitive to ambient temperature changes above 40 degrees Celsius. The 140G-H0F3-C80 circuit breaker is CE marked and CCC and CSA certified, and it has an approximate shipping weight of 2.65 pounds.



Technical Description of 140G-H0F3-C80

The Allen-Bradley 140G-H0F3-C80 Molded Case Circuit Breaker has a H Frame and 125 Amps. It also has a 100 kA Interrupting Rating and 3 Poles.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H0F3-C80. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H0F3-C80. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 140G-H0F3-C80 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-H0F3-C80 Ser A
140G-H0F3-C80/A, Series A, Rev A Request Quote

Common misspellings:
  • l40G-H0F3-C80
  • 1A0G-H0F3-C80
  • 14oG-H0F3-C80
  • 140G-HoF3-C80
  • 140G-H0F3-Cb0
  • 140G-H0F3-C8o
  • 140GH0F3C80
PDF