140G-H2C3-C15 | Allen Bradley PLC 140G MCB

140G-H2C3-C15

140G-H2C3-C15

Revisions: Ser A 
Description: The 140G-H2C3-C15 circuit breaker is a thermal/magnetic molded case circuit breaker that supports fixed thermal and fixed magnetic trip ratings. It has been designed and manufactured as part of the Allen-Bradley/Rockwell Automation Bulletin 140G series. The 140G-H2C3-C15 thermal/magnetic molded case circuit breaker’s thermal trip rating is 15 Amps while its magnetic trip rating is 400 Amps. It comes with 3 poles and it is rated to operate at an 80% continuous load rating. The 140G-H2C3-C15 thermal/magnetic molded case circuit breaker is often used in control panels and it can be used as the main circuit protection device or as a branch circuit protection device.
Rated 4.6 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 140G-H2C3-C15

Add more parts to quote

Description: The 140G-H2C3-C15 circuit breaker is a thermal/magnetic molded case circuit breaker that supports fixed thermal and fixed magnetic trip ratings. It has been designed and manufactured as part of the Allen-Bradley/Rockwell Automation Bulletin 140G series. The 140G-H2C3-C15 thermal/magnetic molded case circuit breaker’s thermal trip rating is 15 Amps while its magnetic trip rating is 400 Amps. It comes with 3 poles and it is rated to operate at an 80% continuous load rating. The 140G-H2C3-C15 thermal/magnetic molded case circuit breaker is often used in control panels and it can be used as the main circuit protection device or as a branch circuit protection device.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 140G-H2C3-C15.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 6 reviews

    Technical Specifications for 140G-H2C3-C15

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H2C3-C15
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating25 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range15 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H2C3-C15
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating25 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range15 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
s

About 140G-H2C3-C15

The 140G-H2C3-C15 circuit breaker is a universal molded case circuit breaker that has been designed by Allen-Bradley/Rockwell Automation and whose main use is for providing protection to a specific piece of equipment or system. This circuit breaker comes with a frame that supports a current of 125 Amps. Circuit breakers have the ability to detect abnormal line surges and at the same time react to and stop this flow to prevent these abnormalities from causing damage to the system from an overcurrent. The Allen-Bradley 140G-H2C3-C15 molded case circuit breaker has an interrupting ability of 25 kilowatts and its protective mechanisms consist of thermal and magnetic fixed protection mechanism, meaning that it employs magnets and heated materials to detect and interrupt an overcurrent. It is designed with 3 poles.



The Allen-Bradley 140G-H2C3-C15 universal molded case circuit breaker can be used in places with temperatures below 0 degrees Celsius. This drive is intended to operate at a temperature between 0 and 40 degrees Celsius but there is also the possibility for using it at temperatures below freezing, as mentioned above. When operating below 0 degrees Celsius, this circuit breaker may have ice form around it. It can also operate freely at an altitude of up to 2000 meters. The Allen-Bradley 140G-H2C3-C15 universal molded case circuit breaker structure has a length of 130 millimeters, a width of 90 millimeters, and a depth of 82.5 millimeters. This circuit breaker comes with standard end caps, multi-cable terminal lugs, standard backplates, and extended phase barriers.



Technical Description of 140G-H2C3-C15

The Allen-Bradley 140G-H2C3-C15 Molded Case Circuit Breaker has a H Frame and 125 Amps. It also has a 25 kA Interrupting Rating and 3 Poles.

Repair Services for 140G-H2C3-C15

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H2C3-C15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 140G-H2C3-C15

Please refer to the manual for more information about the 140G-H2C3-C15 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-H2C3-C15 Ser A
140G-H2C3-C15/A, Series A, Rev A Request Quote
Common misspellings:
  • l40G-H2C3-C15
  • 1A0G-H2C3-C15
  • 14oG-H2C3-C15
  • 140G-H2C3-Cl5
  • 140GH2C3C15

Dimensions For 140G-H2C3-C15

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 140G-H2C3-C15

Resolutions For 140G-H2C3-C15

About

Technical Specifications for 140G-H2C3-C15

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H2C3-C15
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating25 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range15 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H2C3-C15
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating25 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range15 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.

About 140G-H2C3-C15

The 140G-H2C3-C15 circuit breaker is a universal molded case circuit breaker that has been designed by Allen-Bradley/Rockwell Automation and whose main use is for providing protection to a specific piece of equipment or system. This circuit breaker comes with a frame that supports a current of 125 Amps. Circuit breakers have the ability to detect abnormal line surges and at the same time react to and stop this flow to prevent these abnormalities from causing damage to the system from an overcurrent. The Allen-Bradley 140G-H2C3-C15 molded case circuit breaker has an interrupting ability of 25 kilowatts and its protective mechanisms consist of thermal and magnetic fixed protection mechanism, meaning that it employs magnets and heated materials to detect and interrupt an overcurrent. It is designed with 3 poles.



The Allen-Bradley 140G-H2C3-C15 universal molded case circuit breaker can be used in places with temperatures below 0 degrees Celsius. This drive is intended to operate at a temperature between 0 and 40 degrees Celsius but there is also the possibility for using it at temperatures below freezing, as mentioned above. When operating below 0 degrees Celsius, this circuit breaker may have ice form around it. It can also operate freely at an altitude of up to 2000 meters. The Allen-Bradley 140G-H2C3-C15 universal molded case circuit breaker structure has a length of 130 millimeters, a width of 90 millimeters, and a depth of 82.5 millimeters. This circuit breaker comes with standard end caps, multi-cable terminal lugs, standard backplates, and extended phase barriers.



Technical Description of 140G-H2C3-C15

The Allen-Bradley 140G-H2C3-C15 Molded Case Circuit Breaker has a H Frame and 125 Amps. It also has a 25 kA Interrupting Rating and 3 Poles.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H2C3-C15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H2C3-C15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 140G-H2C3-C15 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-H2C3-C15 Ser A
140G-H2C3-C15/A, Series A, Rev A Request Quote

Common misspellings:
  • l40G-H2C3-C15
  • 1A0G-H2C3-C15
  • 14oG-H2C3-C15
  • 140G-H2C3-Cl5
  • 140GH2C3C15
PDF