140G-H2F3-D10 | Allen Bradley PLC 140G MCB

140G-H2F3-D10

140G-H2F3-D10

Revisions: Ser A 
Description: The 140G-H2F3-D10 thermal/magnetic circuit breaker is an adjustable type of thermal/magnetic circuit breaker that has been manufactured as part of the Allen-Bradley/Rockwell Automation Bulletin 140G series. This circuit breaker’s trip ratings are adjustable by the users so that the breaker’s ratings can be fine-tuned to meet the needs of a specific application or system. The thermal trip range supported by the 140G-H2F3-D10 thermal/magnetic circuit breaker is from 70 to 100 Amps while the magnetic trip range is from 500 to 1000 Amps. This circuit breaker can be used for main circuit protection or branch circuit protection in industrial control panels. The 140G-H2F3-D10 thermal/magnetic circuit breaker supports field installation and DIN Rail mounting.
Rated 4.6 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 140G-H2F3-D10

Add more parts to quote

Description: The 140G-H2F3-D10 thermal/magnetic circuit breaker is an adjustable type of thermal/magnetic circuit breaker that has been manufactured as part of the Allen-Bradley/Rockwell Automation Bulletin 140G series. This circuit breaker’s trip ratings are adjustable by the users so that the breaker’s ratings can be fine-tuned to meet the needs of a specific application or system. The thermal trip range supported by the 140G-H2F3-D10 thermal/magnetic circuit breaker is from 70 to 100 Amps while the magnetic trip range is from 500 to 1000 Amps. This circuit breaker can be used for main circuit protection or branch circuit protection in industrial control panels. The 140G-H2F3-D10 thermal/magnetic circuit breaker supports field installation and DIN Rail mounting.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 140G-H2F3-D10.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 16 reviews

    Technical Specifications for 140G-H2F3-D10

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H2F3-D10
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating25 kA
Protection TypeAdjust Thermal/ Adjust Magnetic
Current Range100 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H2F3-D10
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating25 kA
Protection TypeAdjust Thermal/ Adjust Magnetic
Current Range100 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
s

About 140G-H2F3-D10

The 140G-H2F3-D10 circuit breaker from Allen-Bradley is a circuit breaker with a thermal and magnetic trip unit rated at 100 Amps. It is a molded-case circuit breaker which belongs to 140G product family. The rated current for the 140G-H2F3-D10 circuit breaker at 104 degrees Fahrenheit is 100 Amps. The thermal trip range is from 70 to 100 Amps and the magnetic trip range is from 500 to 1000 Amps. The ultimate and in-service breaking capacity for this circuit breaker for 250 to 500 Volts DC voltage is 36 kiloamps. The ultimate and in-service breaking capacities for 220,  415, 440, and 690 Volts AC are 65, 36, 36, and 10 kiloamps. The 3-pole 140G-H2F3-D10 circuit breaker is available in an H Frame with adjustable magnetic and adjustable thermal trip units. The ultimate impulse withstand voltage is 8 kilovolts. The breaker should not be mounted on a bus bar. The reverse connection of the supply is possible with the 140G-H2F3-D10 circuit breaker. The voltage rating of the insulation on the breaker is 800 Volts.



The approximate weight of the 140G-H2F3-D10 circuit breaker is 1.2 kilograms and it measures 5.1 x 3.5 x 3.22 inches. The recommended range of the temperature for operation of the 140G-H2F3-D10 circuit breaker is from -13 to 158 degrees Fahrenheit. For storage, the circuit breaker should be kept where the ambient temperature remains between -40 and 176 degrees Fahrenheit. The 140G-H2F3-D10 circuit breaker is certified by the CSA and UL standards and it complies with multiple standards, including the IEC 60947-2 standards. The 140G-H2F3-D10 circuit breaker should be kept free from contaminants. It should be installed inside a suitable enclosure and the power should be disconnected prior to installation.



Technical Description of 140G-H2F3-D10

The Allen-Bradley 140G-H2F3-D10 Molded Case Circuit Breaker has a H Frame and 125 Amps. It also has a 25 kA Interrupting Rating and 3 Poles.

Repair Services for 140G-H2F3-D10

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H2F3-D10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 140G-H2F3-D10

Please refer to the manual for more information about the 140G-H2F3-D10 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-H2F3-D10 Ser A
140G-H2F3-D10/A, Series A, Rev A Request Quote
Common misspellings:
  • l40G-H2F3-D10
  • 1A0G-H2F3-D10
  • 14oG-H2F3-D10
  • 140G-H2F3-Dl0
  • 140G-H2F3-D1o
  • 140GH2F3D10

Dimensions For 140G-H2F3-D10

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 140G-H2F3-D10

Resolutions For 140G-H2F3-D10

About

Technical Specifications for 140G-H2F3-D10

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H2F3-D10
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating25 kA
Protection TypeAdjust Thermal/ Adjust Magnetic
Current Range100 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H2F3-D10
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating25 kA
Protection TypeAdjust Thermal/ Adjust Magnetic
Current Range100 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.

About 140G-H2F3-D10

The 140G-H2F3-D10 circuit breaker from Allen-Bradley is a circuit breaker with a thermal and magnetic trip unit rated at 100 Amps. It is a molded-case circuit breaker which belongs to 140G product family. The rated current for the 140G-H2F3-D10 circuit breaker at 104 degrees Fahrenheit is 100 Amps. The thermal trip range is from 70 to 100 Amps and the magnetic trip range is from 500 to 1000 Amps. The ultimate and in-service breaking capacity for this circuit breaker for 250 to 500 Volts DC voltage is 36 kiloamps. The ultimate and in-service breaking capacities for 220,  415, 440, and 690 Volts AC are 65, 36, 36, and 10 kiloamps. The 3-pole 140G-H2F3-D10 circuit breaker is available in an H Frame with adjustable magnetic and adjustable thermal trip units. The ultimate impulse withstand voltage is 8 kilovolts. The breaker should not be mounted on a bus bar. The reverse connection of the supply is possible with the 140G-H2F3-D10 circuit breaker. The voltage rating of the insulation on the breaker is 800 Volts.



The approximate weight of the 140G-H2F3-D10 circuit breaker is 1.2 kilograms and it measures 5.1 x 3.5 x 3.22 inches. The recommended range of the temperature for operation of the 140G-H2F3-D10 circuit breaker is from -13 to 158 degrees Fahrenheit. For storage, the circuit breaker should be kept where the ambient temperature remains between -40 and 176 degrees Fahrenheit. The 140G-H2F3-D10 circuit breaker is certified by the CSA and UL standards and it complies with multiple standards, including the IEC 60947-2 standards. The 140G-H2F3-D10 circuit breaker should be kept free from contaminants. It should be installed inside a suitable enclosure and the power should be disconnected prior to installation.



Technical Description of 140G-H2F3-D10

The Allen-Bradley 140G-H2F3-D10 Molded Case Circuit Breaker has a H Frame and 125 Amps. It also has a 25 kA Interrupting Rating and 3 Poles.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H2F3-D10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-H2F3-D10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 140G-H2F3-D10 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-H2F3-D10 Ser A
140G-H2F3-D10/A, Series A, Rev A Request Quote

Common misspellings:
  • l40G-H2F3-D10
  • 1A0G-H2F3-D10
  • 14oG-H2F3-D10
  • 140G-H2F3-Dl0
  • 140G-H2F3-D1o
  • 140GH2F3D10
PDF