140G-H6C3-C70 | Allen Bradley PLC 140G MCB

140G-H6C3-C70

140G-H6C3-C70

Revisions: Ser A 
Description: The Allen-Bradley/Rockwell Automation 140G-H6C3-C70 circuit breaker is a Bulletin 140G series fixed thermal and fixed magnetic circuit breaker. It will trip at a fixed thermal threshold of 70 Amps or at a fixed magnetic threshold of 700 Amps. The 140G-H6C3-C70 circuit breaker can be installed as a branch circuit protection device or even as the main circuit protection device in a control panel. Additionally, this circuit breaker can be mounted in a horizontal or vertical position and it can be installed in a cabinet for protection. The 140G-H6C3-C70 circuit breaker can also handle an 80% continuous load during operation.
Rated 4.8 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 140G-H6C3-C70

Add more parts to quote

Description: The Allen-Bradley/Rockwell Automation 140G-H6C3-C70 circuit breaker is a Bulletin 140G series fixed thermal and fixed magnetic circuit breaker. It will trip at a fixed thermal threshold of 70 Amps or at a fixed magnetic threshold of 700 Amps. The 140G-H6C3-C70 circuit breaker can be installed as a branch circuit protection device or even as the main circuit protection device in a control panel. Additionally, this circuit breaker can be mounted in a horizontal or vertical position and it can be installed in a cabinet for protection. The 140G-H6C3-C70 circuit breaker can also handle an 80% continuous load during operation.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 140G-H6C3-C70.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 10 reviews

    Technical Specifications for 140G-H6C3-C70

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H6C3-C70
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating65 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range70 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H6C3-C70
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating65 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range70 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
s

About 140G-H6C3-C70

The 140G-H6C3-C70 circuit breaker is a 140G circuit breaker designed and manufactured by Allen-Bradley. Breakers belonging to the 140G family offer a wide range of mounting options, electronic and thermal/magnetic protection, space-saving dimensions, and up to 3000 Amps of current rating. To prevent any equipment damage and injury to the users, the main source of electrical power to the system must be disconnected before the installation or maintenance of the 140G-H6C3-C70 circuit breaker is performed. The enclosure used for housing the breaker should be capable of protecting it from damaging contaminants such as water or corrosive substances.



The dimensions of the H Frame 140G-H6C3-C70 circuit breaker are 90 x 82.5 x 130 millimeters (width x depth x height). The device is a 3-pole molded case circuit breaker with 1.2 kilograms of weight. For optimal operation according to manufacturer specifications, the 140G-H6C3-C70 circuit breaker should be operated at ambient temperatures that are less than or equal to 40 degrees Celsius. Above 40 degrees Celsius, the circuit breaker output will derate. At 415 Volts AC and 120 operations per hour, the manufacturer’s specified electrical life of the 140G-H6C3-C70 circuit breaker is 8000 operations. At 240 operations per hour, the specified mechanical life of the breaker is 25,000 operations. According to the IEC standards, the rated insulation voltage for the 140G-H6C3-C70 circuit breaker is 1 kilovolt. The rated impulse withstand voltage for the 140G-H6C3-C70 circuit breaker is 8 kilovolts. The breaker includes an integrated non-adjustable thermal/magnetic trip system. The current rating of the 140G-H6C3-C70 circuit breaker is 70 Amps. The specified magnetic and thermal trip configurations for the 140G-H6C3-C70 circuit breaker are 700 Amps and 70 Amps, respectively.



Technical Description of 140G-H6C3-C70

The Allen-Bradley 140G-H6C3-C70 Molded Case Circuit Breaker has a H Frame and 125 Amps. It also has a 65 kA Interrupting Rating and 3 Poles.

Repair Services for 140G-H6C3-C70

Type Lead Time Price Action
Repair Service 2-4 weeks $826cartAdd to Cart

Our highly skilled technicians can repair your 140G-H6C3-C70. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 140G-H6C3-C70

Please refer to the manual for more information about the 140G-H6C3-C70 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-H6C3-C70 Ser A
140G-H6C3-C70/A, Series A, Rev A Request Quote
Common misspellings:
  • l40G-H6C3-C70
  • 1A0G-H6C3-C70
  • 14oG-H6C3-C70
  • 140G-H6C3-C7o
  • 140GH6C3C70

Dimensions For 140G-H6C3-C70

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 140G-H6C3-C70

Resolutions For 140G-H6C3-C70

About

Technical Specifications for 140G-H6C3-C70

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H6C3-C70
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating65 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range70 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.140G-H6C3-C70
Product TypeMolded Case Circuit Breaker
FrameH
Amps125
Interrupting Rating65 kA
Protection TypeFixed Thermal/ Fixed Magnetic
Current Range70 A
Rated Insulation Voltage1000 V
Rated Impulse Withstand Voltage8 kV
Weight2.65 lb
Mechanical Life240 Operations/hr.
Electrical Life120 Operations/ hr.

About 140G-H6C3-C70

The 140G-H6C3-C70 circuit breaker is a 140G circuit breaker designed and manufactured by Allen-Bradley. Breakers belonging to the 140G family offer a wide range of mounting options, electronic and thermal/magnetic protection, space-saving dimensions, and up to 3000 Amps of current rating. To prevent any equipment damage and injury to the users, the main source of electrical power to the system must be disconnected before the installation or maintenance of the 140G-H6C3-C70 circuit breaker is performed. The enclosure used for housing the breaker should be capable of protecting it from damaging contaminants such as water or corrosive substances.



The dimensions of the H Frame 140G-H6C3-C70 circuit breaker are 90 x 82.5 x 130 millimeters (width x depth x height). The device is a 3-pole molded case circuit breaker with 1.2 kilograms of weight. For optimal operation according to manufacturer specifications, the 140G-H6C3-C70 circuit breaker should be operated at ambient temperatures that are less than or equal to 40 degrees Celsius. Above 40 degrees Celsius, the circuit breaker output will derate. At 415 Volts AC and 120 operations per hour, the manufacturer’s specified electrical life of the 140G-H6C3-C70 circuit breaker is 8000 operations. At 240 operations per hour, the specified mechanical life of the breaker is 25,000 operations. According to the IEC standards, the rated insulation voltage for the 140G-H6C3-C70 circuit breaker is 1 kilovolt. The rated impulse withstand voltage for the 140G-H6C3-C70 circuit breaker is 8 kilovolts. The breaker includes an integrated non-adjustable thermal/magnetic trip system. The current rating of the 140G-H6C3-C70 circuit breaker is 70 Amps. The specified magnetic and thermal trip configurations for the 140G-H6C3-C70 circuit breaker are 700 Amps and 70 Amps, respectively.



Technical Description of 140G-H6C3-C70

The Allen-Bradley 140G-H6C3-C70 Molded Case Circuit Breaker has a H Frame and 125 Amps. It also has a 65 kA Interrupting Rating and 3 Poles.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $826cartAdd to Cart

Our highly skilled technicians can repair your 140G-H6C3-C70. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $826cartAdd to Cart

Our highly skilled technicians can repair your 140G-H6C3-C70. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 140G-H6C3-C70 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
140G-H6C3-C70 Ser A
140G-H6C3-C70/A, Series A, Rev A Request Quote

Common misspellings:
  • l40G-H6C3-C70
  • 1A0G-H6C3-C70
  • 14oG-H6C3-C70
  • 140G-H6C3-C7o
  • 140GH6C3C70
PDF