140G-J-FMX10 | Allen Bradley PLC 140G MCB

140G-J-FMX10

140G-J-FMX10

Description:

The Allen-Bradley 140G-J-FMX10 Cable Operator is a flange-mounted cable operator for use in NEMA-style flange enclosures. With this cable operator, it is not necessary to open the panel board or enclosure to operate a 140G Series Circuit Breaker or a disconnect switch installed inside. It is an ideal attachment for those applications where ease of operation, user safety, and the integrity of the equipment installed inside an electrical cabinet is a top priority.

Rated 5 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 140G-J-FMX10

Add more parts to quote

Description:

The Allen-Bradley 140G-J-FMX10 Cable Operator is a flange-mounted cable operator for use in NEMA-style flange enclosures. With this cable operator, it is not necessary to open the panel board or enclosure to operate a 140G Series Circuit Breaker or a disconnect switch installed inside. It is an ideal attachment for those applications where ease of operation, user safety, and the integrity of the equipment installed inside an electrical cabinet is a top priority.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 140G-J-FMX10.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 14 reviews

    Technical Specifications for 140G-J-FMX10

BrandAllen-Bradley / Rockwell Automation
Series140G MCB
Part Number140G-J-FMX10
Type of ComponentFlange-mounted Cable Operator
Handle SizeType 1/12
Frame to be used withJ-Frame
Parts provided with the assemblyActuator, Door handle, cable and mounting hardware
BrandAllen-Bradley / Rockwell Automation
Series140G MCB
Part Number140G-J-FMX10
Type of ComponentFlange-mounted Cable Operator
Handle SizeType 1/12
Frame to be used withJ-Frame
Parts provided with the assemblyActuator, Door handle, cable and mounting hardware
s

About 140G-J-FMX10

The Allen-Bradley 140G-J-FMX10 Cable Operator is a flange-mounted cable operator for use in NEMA-style flange enclosures. With this cable operator, it is not necessary to open the panel board or enclosure to operate a 140G Series Circuit Breaker or the disconnect switch installed inside. It is an ideal attachment for those applications where ease of operation, user safety, and integrity of the equipment installed inside an electrical cabinet are a top priority. The Allen-Bradley 140G-J-FMX10 Cable Operator comes as a pre-assembled accessory for the J Frame product line of the 140G Molded Case Circuit Breakers and Molded Cases Switches and it includes a painted metal handle, the MCCB (Molded Case Circuit Breaker), the cable that is required to connect the external and internal assemblies, and all the necessary hardware for getting the installation up and running.



 



To ensure the safe installation of the Allen-Bradley 140G-J-FMX10 Flange-Mounted Cable Operator, always remember that to prevent a power shock, all the power sources to the MCCB must be disconnected before servicing or installing the product. Note that the cable operator should always be installed in a suitable enclosure, and in an environment free from contaminants. To begin the Allen-Bradley 140G-J-FMX10 Flange-mounted Cable Operator's installation process, the users need to make sure that the breaker is powered off and to install the actuator on top of the breaker, with the breaker level properly attached to it. The next step is to install the operating handle in the enclosure door and attach the remote operation cable in order to connect the handle to the actuator that is already placed on top of the breaker. When the device is properly installed, the users will be able to operate the breaker without the need to open the panel board door.



Repair Services for 140G-J-FMX10

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-J-FMX10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 140G-J-FMX10

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 140G-J-FMX10

Resolutions For 140G-J-FMX10

About

Technical Specifications for 140G-J-FMX10

BrandAllen-Bradley / Rockwell Automation
Series140G MCB
Part Number140G-J-FMX10
Type of ComponentFlange-mounted Cable Operator
Handle SizeType 1/12
Frame to be used withJ-Frame
Parts provided with the assemblyActuator, Door handle, cable and mounting hardware
BrandAllen-Bradley / Rockwell Automation
Series140G MCB
Part Number140G-J-FMX10
Type of ComponentFlange-mounted Cable Operator
Handle SizeType 1/12
Frame to be used withJ-Frame
Parts provided with the assemblyActuator, Door handle, cable and mounting hardware

About 140G-J-FMX10

The Allen-Bradley 140G-J-FMX10 Cable Operator is a flange-mounted cable operator for use in NEMA-style flange enclosures. With this cable operator, it is not necessary to open the panel board or enclosure to operate a 140G Series Circuit Breaker or the disconnect switch installed inside. It is an ideal attachment for those applications where ease of operation, user safety, and integrity of the equipment installed inside an electrical cabinet are a top priority. The Allen-Bradley 140G-J-FMX10 Cable Operator comes as a pre-assembled accessory for the J Frame product line of the 140G Molded Case Circuit Breakers and Molded Cases Switches and it includes a painted metal handle, the MCCB (Molded Case Circuit Breaker), the cable that is required to connect the external and internal assemblies, and all the necessary hardware for getting the installation up and running.



 



To ensure the safe installation of the Allen-Bradley 140G-J-FMX10 Flange-Mounted Cable Operator, always remember that to prevent a power shock, all the power sources to the MCCB must be disconnected before servicing or installing the product. Note that the cable operator should always be installed in a suitable enclosure, and in an environment free from contaminants. To begin the Allen-Bradley 140G-J-FMX10 Flange-mounted Cable Operator's installation process, the users need to make sure that the breaker is powered off and to install the actuator on top of the breaker, with the breaker level properly attached to it. The next step is to install the operating handle in the enclosure door and attach the remote operation cable in order to connect the handle to the actuator that is already placed on top of the breaker. When the device is properly installed, the users will be able to operate the breaker without the need to open the panel board door.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-J-FMX10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140G-J-FMX10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF