140U-J2D3-D22
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 140U-J2D3-D22. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140U-J2D3-D22 |
Product Description | Molded Case Circuit Breaker |
Frame Size | J |
Frame Rating | 250 Amps |
No. of Poles | 3 |
Interrupting Rating | 25 Kiloamps |
Protection Type | Fixed Thermal/Adjustable Magnetic |
Rated Operational Voltage | 400/480 Volts AC |
Amperage Rating | 225 Amps |
Frequency Rating | 50/60 Hertz |
Weight (approx.) | 11.4 Pounds |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140U-J2D3-D22 |
Product Description | Molded Case Circuit Breaker |
Frame Size | J |
Frame Rating | 250 Amps |
No. of Poles | 3 |
Interrupting Rating | 25 Kiloamps |
Protection Type | Fixed Thermal/Adjustable Magnetic |
Rated Operational Voltage | 400/480 Volts AC |
Amperage Rating | 225 Amps |
Frequency Rating | 50/60 Hertz |
Weight (approx.) | 11.4 Pounds |
The 140U-J2D3-D22 Molded Case Circuit Breaker (MCCB) is a high-performance compact circuit breaker from Allen-Bradley/Rockwell Automation. It has a size J frame, 3 poles, and 250 Amps of rated frame current. The rated operational voltage of the circuit breaker is 400 to 480 Volts AC and the current rating is 225 Amps. It comes with 25 Kiloamps of interrupting rating and 11.4 pounds of approximate shipping weight. This circuit breaker is designed to open a circuit automatically on a predetermined overcurrent setting without injuring the circuit breaker itself. For that to function properly, it must be properly applied within its rating. The 140U-J2D3-D22 Molded Case Circuit Breaker has a high interrupting rating that is the maximum interrupting level of fault current that the circuit breaker can safely interrupt without damaging the breaker itself.
The 140U-J2D3-D22 Molded Case Circuit Breaker can be used for a wide range of voltages and frequencies with its adjustable trip settings. Its trip mechanism provides protection and isolation to the circuit. When selecting the MCCB, the application voltage, the current rating of the load to be protected, and the available short circuit current need to be taken into consideration. Large differences in the ambient temperature level can affect the operation of this magnetic thermal circuit breaker. During installation, make sure to mount the circuit breaker in a clean and dry environment. The housing of the contact structure is contained within a molded based that is finished with a molded lid. Its compact design and internal accessories that can be field-fitted make installations and configuration easy. The 140U-J2D3-D22 Molded Case Circuit Breaker is suitable to use in applications where the load to be expected to change.
The 140U-J2D3-D22 Molded Case Circuit Breaker is a high-performance compact breaker from Allen-Bradley/Rockwell Automation. It has a size J frame, 3 poles, and 250 Amps of frame current. The rated operational voltage of the breaker is 400 or 480 Volts AC, the current rating is 225 Amps, and the interrupting rating is 25 Kiloamps.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140U-J2D3-D22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140U-J2D3-D22 |
Product Description | Molded Case Circuit Breaker |
Frame Size | J |
Frame Rating | 250 Amps |
No. of Poles | 3 |
Interrupting Rating | 25 Kiloamps |
Protection Type | Fixed Thermal/Adjustable Magnetic |
Rated Operational Voltage | 400/480 Volts AC |
Amperage Rating | 225 Amps |
Frequency Rating | 50/60 Hertz |
Weight (approx.) | 11.4 Pounds |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140U-J2D3-D22 |
Product Description | Molded Case Circuit Breaker |
Frame Size | J |
Frame Rating | 250 Amps |
No. of Poles | 3 |
Interrupting Rating | 25 Kiloamps |
Protection Type | Fixed Thermal/Adjustable Magnetic |
Rated Operational Voltage | 400/480 Volts AC |
Amperage Rating | 225 Amps |
Frequency Rating | 50/60 Hertz |
Weight (approx.) | 11.4 Pounds |
The 140U-J2D3-D22 Molded Case Circuit Breaker (MCCB) is a high-performance compact circuit breaker from Allen-Bradley/Rockwell Automation. It has a size J frame, 3 poles, and 250 Amps of rated frame current. The rated operational voltage of the circuit breaker is 400 to 480 Volts AC and the current rating is 225 Amps. It comes with 25 Kiloamps of interrupting rating and 11.4 pounds of approximate shipping weight. This circuit breaker is designed to open a circuit automatically on a predetermined overcurrent setting without injuring the circuit breaker itself. For that to function properly, it must be properly applied within its rating. The 140U-J2D3-D22 Molded Case Circuit Breaker has a high interrupting rating that is the maximum interrupting level of fault current that the circuit breaker can safely interrupt without damaging the breaker itself.
The 140U-J2D3-D22 Molded Case Circuit Breaker can be used for a wide range of voltages and frequencies with its adjustable trip settings. Its trip mechanism provides protection and isolation to the circuit. When selecting the MCCB, the application voltage, the current rating of the load to be protected, and the available short circuit current need to be taken into consideration. Large differences in the ambient temperature level can affect the operation of this magnetic thermal circuit breaker. During installation, make sure to mount the circuit breaker in a clean and dry environment. The housing of the contact structure is contained within a molded based that is finished with a molded lid. Its compact design and internal accessories that can be field-fitted make installations and configuration easy. The 140U-J2D3-D22 Molded Case Circuit Breaker is suitable to use in applications where the load to be expected to change.
The 140U-J2D3-D22 Molded Case Circuit Breaker is a high-performance compact breaker from Allen-Bradley/Rockwell Automation. It has a size J frame, 3 poles, and 250 Amps of frame current. The rated operational voltage of the breaker is 400 or 480 Volts AC, the current rating is 225 Amps, and the interrupting rating is 25 Kiloamps.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140U-J2D3-D22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140U-J2D3-D22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.