140U-J6G3-D25 | Allen Bradley PLC 140U MCB

140U-J6G3-D25

140U-J6G3-D25

Description:

The 140U-J6G3-D25 circuit breaker is a circuit breaker with an interrupt rating of 65 kA. It uses convection cooling to maintain the ambient temperature.

Rated 4.7 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 140U-J6G3-D25

Add more parts to quote

Description:

The 140U-J6G3-D25 circuit breaker is a circuit breaker with an interrupt rating of 65 kA. It uses convection cooling to maintain the ambient temperature.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 140U-J6G3-D25.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 5 reviews

    Technical Specifications for 140U-J6G3-D25

BrandAllen-Bradley / Rockwell Automation
Series140U MCB
Part Number140U-J6G3-D25
DescriptionMolded Case Circuit Breaker
Voltage600 Volts AC
Interrupt65 kA
Current160 Amperes
Phase3
Poles3
Frequency50/60 Hertz
Temperature-25-60 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
Series140U MCB
Part Number140U-J6G3-D25
DescriptionMolded Case Circuit Breaker
Voltage600 Volts AC
Interrupt65 kA
Current160 Amperes
Phase3
Poles3
Frequency50/60 Hertz
Temperature-25-60 degrees Celsius
s

About 140U-J6G3-D25

The 140U-J6G3-D25 circuit breaker is a molded case breaker device by Allen-Bradley. It is part of the 140U series from Allen-Bradley. It is a three-phase device with support for single-phase applications too. It comes with three poles and it can support multiple circuits at a time. With a current rating of 160 Amps and a voltage rating of 600 Volts AC, the circuit breaker supports an interrupt rating of 65 kA at 480 Volts. It supports both short time and ground fault trip functions. The front part of the 140U-J6G3-D25 circuit breaker comes with line and load side lug terminals. The line terminal is the one where the wires from the panel are connected. The load terminal is the place where the application or load device is connected. These terminals need to be connected properly for the breaker to function properly. This circuit breaker variant is a solid-state electronic breaker that offers enhanced performance. It is built using high-quality materials and it is cost-effective in nature.



 



The 140U-J6G3-D25 circuit breaker comprises individual components that are connected together. These components are easily available and they are easy to replace when needed. It reduces the need to keep the components stocked. The installation area should be free from electrostatic discharge because the components can be damaged by the discharge. The 140U-J6G3-D25 circuit breaker temperature should remain between -25 and 60 degrees Celsius for normal operation. The temperature is maintained by using the convection cooling method, hence the airflow between the nearest ventilation source and the circuit breaker should not be obstructed.



Repair Services for 140U-J6G3-D25

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140U-J6G3-D25. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 140U-J6G3-D25

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 140U-J6G3-D25

Resolutions For 140U-J6G3-D25

About

Technical Specifications for 140U-J6G3-D25

BrandAllen-Bradley / Rockwell Automation
Series140U MCB
Part Number140U-J6G3-D25
DescriptionMolded Case Circuit Breaker
Voltage600 Volts AC
Interrupt65 kA
Current160 Amperes
Phase3
Poles3
Frequency50/60 Hertz
Temperature-25-60 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
Series140U MCB
Part Number140U-J6G3-D25
DescriptionMolded Case Circuit Breaker
Voltage600 Volts AC
Interrupt65 kA
Current160 Amperes
Phase3
Poles3
Frequency50/60 Hertz
Temperature-25-60 degrees Celsius

About 140U-J6G3-D25

The 140U-J6G3-D25 circuit breaker is a molded case breaker device by Allen-Bradley. It is part of the 140U series from Allen-Bradley. It is a three-phase device with support for single-phase applications too. It comes with three poles and it can support multiple circuits at a time. With a current rating of 160 Amps and a voltage rating of 600 Volts AC, the circuit breaker supports an interrupt rating of 65 kA at 480 Volts. It supports both short time and ground fault trip functions. The front part of the 140U-J6G3-D25 circuit breaker comes with line and load side lug terminals. The line terminal is the one where the wires from the panel are connected. The load terminal is the place where the application or load device is connected. These terminals need to be connected properly for the breaker to function properly. This circuit breaker variant is a solid-state electronic breaker that offers enhanced performance. It is built using high-quality materials and it is cost-effective in nature.



 



The 140U-J6G3-D25 circuit breaker comprises individual components that are connected together. These components are easily available and they are easy to replace when needed. It reduces the need to keep the components stocked. The installation area should be free from electrostatic discharge because the components can be damaged by the discharge. The 140U-J6G3-D25 circuit breaker temperature should remain between -25 and 60 degrees Celsius for normal operation. The temperature is maintained by using the convection cooling method, hence the airflow between the nearest ventilation source and the circuit breaker should not be obstructed.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140U-J6G3-D25. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140U-J6G3-D25. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF