DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 140U-L6G3-D60 Molded Case Circuit Breaker comes with a Size L frame, 3 poles, and 600 Amps of frame current rating. It has 690/600 Volts AC of rated operational voltage, 600 Amps of current, 50/60 Hertz of frequency, and 65 kiloamps of interrupting rating.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 140U-L6G3-D60. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140U-L6G3-D60 |
Product Description | Molded Case Circuit Breaker |
Frame Size | L |
Frame Rating | 600 Amps |
No. of Poles | 3 |
Breaking Capacity | 60-69 Kiloamps |
Protection Type | Electronics - LSG |
Rated Operational Voltage | 690/600 Volts AC |
Frequency Rating | 50/60 Hertz |
Current Range | 300-600 Amps |
Weight (approx.) | 13.4 Pounds |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140U-L6G3-D60 |
Product Description | Molded Case Circuit Breaker |
Frame Size | L |
Frame Rating | 600 Amps |
No. of Poles | 3 |
Breaking Capacity | 60-69 Kiloamps |
Protection Type | Electronics - LSG |
Rated Operational Voltage | 690/600 Volts AC |
Frequency Rating | 50/60 Hertz |
Current Range | 300-600 Amps |
Weight (approx.) | 13.4 Pounds |
The Allen-Bradley 140U-L6G3-D60 Molded Case Circuit Breaker (MCCB) comes with a Size L frame, 3 poles, and 600 Amps of frame current rating. This MCCB can be used to turn an electric circuit on and off. The electronic trip unit of the breaker can tailor the tripping characteristics of the breaker and it provides additional tripping characteristics such as the long time, short time, and ground fault trips. The flex cable operator, multi-tap terminal lugs, end cap kit, and rotary operator are some of the accessories that are available for this breaker. This electromagnetic switch provides an instantaneous response to a short circuit fault. The 140U-L6G3-D60 Circuit Breaker has an internal arc dissipation mechanism to absorb the generated arc. This MCCB provides thermal protection for the feeder wires in industrial control panels but it is not suitable for applications that are intended for frequent short circuit interruptions.
The 140U-L6G3-D60 Molded Case Circuit Breaker is UL and CSA listed to meet industrial standards. The breaker has a time delay that allows the circuit to continue to operate in the inrush current when starting the motor without tripping the MCCB. It is suitable for use in large electrical power circuits as the feeder device and for use in distribution systems. The 140U-L6G3-D60 Circuit Breaker can also be used as the main control switch and an emergency stop switch. This MCCB requires no maintenance. However, periodic inspection is necessary to prevent unexpected failures. Within a -20 to 55 degrees Celsius temperature range, the electronic trip unit is insensitive to the ambient temperature, but exceeding this temperature can damage the electronics circuit in the trip unit. This breaker can be used as a manual disconnection switch during maintenance or in case of an emergency. Ensure that there is a good connection to the power supply and the load when wiring the breaker in a power circuit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140U-L6G3-D60. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140U-L6G3-D60 |
Product Description | Molded Case Circuit Breaker |
Frame Size | L |
Frame Rating | 600 Amps |
No. of Poles | 3 |
Breaking Capacity | 60-69 Kiloamps |
Protection Type | Electronics - LSG |
Rated Operational Voltage | 690/600 Volts AC |
Frequency Rating | 50/60 Hertz |
Current Range | 300-600 Amps |
Weight (approx.) | 13.4 Pounds |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140U-L6G3-D60 |
Product Description | Molded Case Circuit Breaker |
Frame Size | L |
Frame Rating | 600 Amps |
No. of Poles | 3 |
Breaking Capacity | 60-69 Kiloamps |
Protection Type | Electronics - LSG |
Rated Operational Voltage | 690/600 Volts AC |
Frequency Rating | 50/60 Hertz |
Current Range | 300-600 Amps |
Weight (approx.) | 13.4 Pounds |
The Allen-Bradley 140U-L6G3-D60 Molded Case Circuit Breaker (MCCB) comes with a Size L frame, 3 poles, and 600 Amps of frame current rating. This MCCB can be used to turn an electric circuit on and off. The electronic trip unit of the breaker can tailor the tripping characteristics of the breaker and it provides additional tripping characteristics such as the long time, short time, and ground fault trips. The flex cable operator, multi-tap terminal lugs, end cap kit, and rotary operator are some of the accessories that are available for this breaker. This electromagnetic switch provides an instantaneous response to a short circuit fault. The 140U-L6G3-D60 Circuit Breaker has an internal arc dissipation mechanism to absorb the generated arc. This MCCB provides thermal protection for the feeder wires in industrial control panels but it is not suitable for applications that are intended for frequent short circuit interruptions.
The 140U-L6G3-D60 Molded Case Circuit Breaker is UL and CSA listed to meet industrial standards. The breaker has a time delay that allows the circuit to continue to operate in the inrush current when starting the motor without tripping the MCCB. It is suitable for use in large electrical power circuits as the feeder device and for use in distribution systems. The 140U-L6G3-D60 Circuit Breaker can also be used as the main control switch and an emergency stop switch. This MCCB requires no maintenance. However, periodic inspection is necessary to prevent unexpected failures. Within a -20 to 55 degrees Celsius temperature range, the electronic trip unit is insensitive to the ambient temperature, but exceeding this temperature can damage the electronics circuit in the trip unit. This breaker can be used as a manual disconnection switch during maintenance or in case of an emergency. Ensure that there is a good connection to the power supply and the load when wiring the breaker in a power circuit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140U-L6G3-D60. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140U-L6G3-D60. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.