DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 140UE-H7E3-D12 circuit breaker is an IEC molded case circuit breaker. The circuit breaker comes has a rated current of 125 Amps, as well as adjustable and fixed thermal protection mechanisms.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 140UE-H7E3-D12. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140UE-H7E3-D12 |
Product type | IEC molded case circuit breaker |
Rated Current | 125A |
Frame | H |
Interrupting rating | 70 to 79 kiloamps at 400 Volts AC |
Poles | 3 |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140UE-H7E3-D12 |
Product type | IEC molded case circuit breaker |
Rated Current | 125A |
Frame | H |
Interrupting rating | 70 to 79 kiloamps at 400 Volts AC |
Poles | 3 |
The 140UE-H7E3-D12 circuit breaker is a motor circuit breaker that offers a number of control and protective services like a disconnect for a motor branch circuit, manual switching, and magnetic protection for short circuit and branch circuit protection. The 140UE-H7E3-D12 motor circuit breaker has one UL/CSA listing as a manual motor controller and it has an optional approval rating for group installation and motor disconnecting. For group installation, the 140UE-H7E3-D12 motor circuit breaker must be installed following the recommended guidelines. These guidelines demand the use of an upstream short-circuit or branch-circuit protective device (BCPD). The 140UE-H7E3-D12 motor circuit breaker has the capability to provide all the important NEC/CEC requirements for the control and protection of individual motor branch circuits, without the need for extra protective devices.
It is important to observe all safety measures when installing the Allen-Bradley 140UE-H7E3-D12 motor circuit breaker. The circuit breaker’s starter or contactor should not cause any danger to people or machines in case of a short circuit. In the case of a short circuit, current-limiting, or fasting opening situation, the 140UE-H7E3-D12 motor circuit breaker makes it possible to create an economical and full short-circuit coordinated starter combination, and this has type-2 coordination. The 140UE-H7E3-D12 circuit breaker is ideal for industrial parts. Therefore, regular operational tests must be done to check if the rating and functioning of the Allen-Bradley 140UE-H7E3-D12 circuit breaker are optimum. When in operation, the temperatures around the breaker must not be very high, because the temperature can affect the tripping mechanism of the 140UE-H7E3-D12 circuit breaker.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140UE-H7E3-D12. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140UE-H7E3-D12 |
Product type | IEC molded case circuit breaker |
Rated Current | 125A |
Frame | H |
Interrupting rating | 70 to 79 kiloamps at 400 Volts AC |
Poles | 3 |
Brand | Allen-Bradley / Rockwell Automation |
Series | 140U MCB |
Part Number | 140UE-H7E3-D12 |
Product type | IEC molded case circuit breaker |
Rated Current | 125A |
Frame | H |
Interrupting rating | 70 to 79 kiloamps at 400 Volts AC |
Poles | 3 |
The 140UE-H7E3-D12 circuit breaker is a motor circuit breaker that offers a number of control and protective services like a disconnect for a motor branch circuit, manual switching, and magnetic protection for short circuit and branch circuit protection. The 140UE-H7E3-D12 motor circuit breaker has one UL/CSA listing as a manual motor controller and it has an optional approval rating for group installation and motor disconnecting. For group installation, the 140UE-H7E3-D12 motor circuit breaker must be installed following the recommended guidelines. These guidelines demand the use of an upstream short-circuit or branch-circuit protective device (BCPD). The 140UE-H7E3-D12 motor circuit breaker has the capability to provide all the important NEC/CEC requirements for the control and protection of individual motor branch circuits, without the need for extra protective devices.
It is important to observe all safety measures when installing the Allen-Bradley 140UE-H7E3-D12 motor circuit breaker. The circuit breaker’s starter or contactor should not cause any danger to people or machines in case of a short circuit. In the case of a short circuit, current-limiting, or fasting opening situation, the 140UE-H7E3-D12 motor circuit breaker makes it possible to create an economical and full short-circuit coordinated starter combination, and this has type-2 coordination. The 140UE-H7E3-D12 circuit breaker is ideal for industrial parts. Therefore, regular operational tests must be done to check if the rating and functioning of the Allen-Bradley 140UE-H7E3-D12 circuit breaker are optimum. When in operation, the temperatures around the breaker must not be very high, because the temperature can affect the tripping mechanism of the 140UE-H7E3-D12 circuit breaker.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140UE-H7E3-D12. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 140UE-H7E3-D12. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.