140UE-J7F3-D20 | Allen Bradley PLC 140U MCB

140UE-J7F3-D20

140UE-J7F3-D20

Description: The 140UE-J7F3-D20 circuit breaker is a circuit breaker that has been designed by Allen-Bradley. The Allen-Bradley 140UE-J7F3-D20 circuit breaker can be used for industrial motors and it operates in two mechanisms, the adjustable thermal mechanism and the fixed magnetic mechanism. This content was written and compiled by dosupply.com and should not be copied.
Rated 4.9 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 140UE-J7F3-D20

Add more parts to quote

Description: The 140UE-J7F3-D20 circuit breaker is a circuit breaker that has been designed by Allen-Bradley. The Allen-Bradley 140UE-J7F3-D20 circuit breaker can be used for industrial motors and it operates in two mechanisms, the adjustable thermal mechanism and the fixed magnetic mechanism. This content was written and compiled by dosupply.com and should not be copied.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 140UE-J7F3-D20.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 8 reviews

    Technical Specifications for 140UE-J7F3-D20

BrandAllen-Bradley / Rockwell Automation
Series140U MCB
Part Number140UE-J7F3-D20
Product typeIEC molded case circuit breaker
FrameJ
Poles3
Interrupting rating70 to 79 kiloamps at 400 Volts AC
Power loss210 kW
BrandAllen-Bradley / Rockwell Automation
Series140U MCB
Part Number140UE-J7F3-D20
Product typeIEC molded case circuit breaker
FrameJ
Poles3
Interrupting rating70 to 79 kiloamps at 400 Volts AC
Power loss210 kW
s

About 140UE-J7F3-D20

The 140UE-J7F3-D20 circuit breaker is a circuit breaker that has been designed by Allen-Bradley. The 140UE-J7F3-D20 circuit breaker is specifically designed for industrial motors to provide both short-circuit and branch-circuit protection. This circuit breaker can be used when it is connected to an industrial motor or when it has been connected to a series of other circuit breakers to offer protection to a system that is made of many pieces of industrial equipment. The 140UE-J7F3-D20 circuit breaker has been designed to provide a high interruption capacity, and its primary detection mechanism consists of two mechanisms, the adjustable thermal mechanisms and fixed magnetic mechanisms. The two detection mechanisms allow the 140UE-J7F3-D20 circuit breaker to become more effective when detecting excessive currents, and to protect industrial motors from these currents.



 



Since the Allen-Bradley 140UE-J7F3-D20 circuit breaker can be used for industrial motors, it is important to make sure that occasional operational tests are performed to check whether the functioning and rating of the circuit breaker are ideal. The 140UE-J7F3-D20 circuit breaker must not operate in extremely high temperatures since these temperatures have a significant impact on the circuit breaker’s tripping mechanism. There are a number of additional accessories that can be used with the Allen Bradley 140UE-J7F3-D20 circuit breaker, and these accessories include enclosures, knobs, and shields. The accessories can be found within the same catalog as the 140UE-J7F3-D20 circuit breaker, and they can be ordered according to the specifications of the 140UE-J7F3-D20 circuit breaker as well as the applications that the circuit breaker is intended for. All safety measures should be observed during the installation of this circuit breaker for optimal performance.



Repair Services for 140UE-J7F3-D20

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140UE-J7F3-D20. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 140UE-J7F3-D20

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 140UE-J7F3-D20

Resolutions For 140UE-J7F3-D20

About

Technical Specifications for 140UE-J7F3-D20

BrandAllen-Bradley / Rockwell Automation
Series140U MCB
Part Number140UE-J7F3-D20
Product typeIEC molded case circuit breaker
FrameJ
Poles3
Interrupting rating70 to 79 kiloamps at 400 Volts AC
Power loss210 kW
BrandAllen-Bradley / Rockwell Automation
Series140U MCB
Part Number140UE-J7F3-D20
Product typeIEC molded case circuit breaker
FrameJ
Poles3
Interrupting rating70 to 79 kiloamps at 400 Volts AC
Power loss210 kW

About 140UE-J7F3-D20

The 140UE-J7F3-D20 circuit breaker is a circuit breaker that has been designed by Allen-Bradley. The 140UE-J7F3-D20 circuit breaker is specifically designed for industrial motors to provide both short-circuit and branch-circuit protection. This circuit breaker can be used when it is connected to an industrial motor or when it has been connected to a series of other circuit breakers to offer protection to a system that is made of many pieces of industrial equipment. The 140UE-J7F3-D20 circuit breaker has been designed to provide a high interruption capacity, and its primary detection mechanism consists of two mechanisms, the adjustable thermal mechanisms and fixed magnetic mechanisms. The two detection mechanisms allow the 140UE-J7F3-D20 circuit breaker to become more effective when detecting excessive currents, and to protect industrial motors from these currents.



 



Since the Allen-Bradley 140UE-J7F3-D20 circuit breaker can be used for industrial motors, it is important to make sure that occasional operational tests are performed to check whether the functioning and rating of the circuit breaker are ideal. The 140UE-J7F3-D20 circuit breaker must not operate in extremely high temperatures since these temperatures have a significant impact on the circuit breaker’s tripping mechanism. There are a number of additional accessories that can be used with the Allen Bradley 140UE-J7F3-D20 circuit breaker, and these accessories include enclosures, knobs, and shields. The accessories can be found within the same catalog as the 140UE-J7F3-D20 circuit breaker, and they can be ordered according to the specifications of the 140UE-J7F3-D20 circuit breaker as well as the applications that the circuit breaker is intended for. All safety measures should be observed during the installation of this circuit breaker for optimal performance.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140UE-J7F3-D20. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 140UE-J7F3-D20. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF