1496-N2 | Allen Bradley PLC 1496 Timers

1496-N2

1496-N2

Description:

The 1496-N2 Pneumatic Timer is a mechanical-pneumatic timing unit from Allen-Bradley/Rockwell Automation. It has a maximum operating voltage of 600 Volts AC, a maximum current of 10 Amps, an adjustable timing range of 1/20 to 180 seconds, and a minimum reset time of 75 milliseconds.

Rated 4.8 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 1496-N2

Add more parts to quote

Description:

The 1496-N2 Pneumatic Timer is a mechanical-pneumatic timing unit from Allen-Bradley/Rockwell Automation. It has a maximum operating voltage of 600 Volts AC, a maximum current of 10 Amps, an adjustable timing range of 1/20 to 180 seconds, and a minimum reset time of 75 milliseconds.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1496-N2.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 15 reviews

    Technical Specifications for 1496-N2

BrandAllen-Bradley / Rockwell Automation
Series1496 Timers
Part Number1496-N2
Product Description Pneumatic Timer
Maximum operating Voltage 600 Volts AC
Maximum Current 10 Amps
Temperature Range 0-104 degrees Fahrenheit
Timing Contacts 1 N.O, 1 N.C
Minimum Time Delay 0.05 Seconds
Maximum Time Delay 180 Seconds
Reset Time 75 milliseconds
Weight (approx.) 0.54 Kilograms
BrandAllen-Bradley / Rockwell Automation
Series1496 Timers
Part Number1496-N2
Product Description Pneumatic Timer
Maximum operating Voltage 600 Volts AC
Maximum Current 10 Amps
Temperature Range 0-104 degrees Fahrenheit
Timing Contacts 1 N.O, 1 N.C
Minimum Time Delay 0.05 Seconds
Maximum Time Delay 180 Seconds
Reset Time 75 milliseconds
Weight (approx.) 0.54 Kilograms
s

About 1496-N2

The 1496-N2 Pneumatic Timer is a mechanical-pneumatic timer that is designed by Allen-Bradley/Rockwell Automation. Its maximum operating voltage rating is 600 Volts AC, its maximum current rating is 10 Amps, and its adjustable timing range is 1/20 to 180 seconds while its minimum reset time is 75 milliseconds. The repetitive accuracy of the timer is approximately +/-10%. The 1496-N2 Pneumatic Timer consists of a contact unit with one normally open contact, one normally closed contact, and one quick make and break type of contact. It comes with a temperature range of 0 to 104 degrees Fahrenheit and an approximate weight of 0.54 kilograms. The normal temperature variation in an operating environment has only a small effect on its accuracy.



 



The 1496-N2 Pneumatic Timer is a standard timer that comes with a maintained contact block. After the push rod of the unit is depressed, the button on the contact block must be pressed to reset the contacts. When both contacts are used, they must be at the same polarity. The timing range of the device can be easily changed from 1/20 seconds to 180 seconds by screwdriver adjustment. During the replacement of the contact unit, the toggle blade must remain in the down position. This enables the blade to fit into the notch in the push plate. The 1496-N2 Mechanical-Pneumatic Timer can be mounted with several methods. However, no matter what mounting method is used, make sure that the plane of the device is always perpendicular to the floor to obtain repetitive accuracy and to give the device a long life. It is designed to produce timing in an electrical circuit. This timer utilizes a piston and control valve that is powered by a consistent air supply to ensure safety in industries that have a high risk of fire.



Repair Services for 1496-N2

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1496-N2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1496-N2

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1496-N2

Resolutions For 1496-N2

About

Technical Specifications for 1496-N2

BrandAllen-Bradley / Rockwell Automation
Series1496 Timers
Part Number1496-N2
Product Description Pneumatic Timer
Maximum operating Voltage 600 Volts AC
Maximum Current 10 Amps
Temperature Range 0-104 degrees Fahrenheit
Timing Contacts 1 N.O, 1 N.C
Minimum Time Delay 0.05 Seconds
Maximum Time Delay 180 Seconds
Reset Time 75 milliseconds
Weight (approx.) 0.54 Kilograms
BrandAllen-Bradley / Rockwell Automation
Series1496 Timers
Part Number1496-N2
Product Description Pneumatic Timer
Maximum operating Voltage 600 Volts AC
Maximum Current 10 Amps
Temperature Range 0-104 degrees Fahrenheit
Timing Contacts 1 N.O, 1 N.C
Minimum Time Delay 0.05 Seconds
Maximum Time Delay 180 Seconds
Reset Time 75 milliseconds
Weight (approx.) 0.54 Kilograms

About 1496-N2

The 1496-N2 Pneumatic Timer is a mechanical-pneumatic timer that is designed by Allen-Bradley/Rockwell Automation. Its maximum operating voltage rating is 600 Volts AC, its maximum current rating is 10 Amps, and its adjustable timing range is 1/20 to 180 seconds while its minimum reset time is 75 milliseconds. The repetitive accuracy of the timer is approximately +/-10%. The 1496-N2 Pneumatic Timer consists of a contact unit with one normally open contact, one normally closed contact, and one quick make and break type of contact. It comes with a temperature range of 0 to 104 degrees Fahrenheit and an approximate weight of 0.54 kilograms. The normal temperature variation in an operating environment has only a small effect on its accuracy.



 



The 1496-N2 Pneumatic Timer is a standard timer that comes with a maintained contact block. After the push rod of the unit is depressed, the button on the contact block must be pressed to reset the contacts. When both contacts are used, they must be at the same polarity. The timing range of the device can be easily changed from 1/20 seconds to 180 seconds by screwdriver adjustment. During the replacement of the contact unit, the toggle blade must remain in the down position. This enables the blade to fit into the notch in the push plate. The 1496-N2 Mechanical-Pneumatic Timer can be mounted with several methods. However, no matter what mounting method is used, make sure that the plane of the device is always perpendicular to the floor to obtain repetitive accuracy and to give the device a long life. It is designed to produce timing in an electrical circuit. This timer utilizes a piston and control valve that is powered by a consistent air supply to ensure safety in industries that have a high risk of fire.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1496-N2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1496-N2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF