Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1606 Switched Mode Power Supplies 1606-XL60DR

Product image is representative; revision or series may vary. Contact us to request a specific version.

1606-XL60DR

|
Need a Specific Revision?

The 1606-XL60DR power supply from Allen-Bradley/Rockwell Automation is designed to operate as a redundant power supply in an industrial machine system. It is part of the Allen-Bradley/Rockwell Automation 1606 series of switched mode power supplies. This redundant power supply module acts as the backup power supply that activates when the system?s main power supply fails for any reason, and it helps to prevent data losses and operating errors. The 1606-XL60DR redundant power supply has 60 Watts of rated output power. This power supply?s output voltage rating is 24 Volts DC and its input voltage ratings are 100 to 120 Volts AC and 200 to 240 Volts AC, and the input voltage ratings are manually selectable.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1606-XL60DR

ManufacturerAllen Bradley
Product TypeSwitched Mode Power Supply
Product Line1606 Switched Mode Power Supplies
Part Number1606-XL60DR
UPC662073044130
Weight0.63 lbs (0.28 kg)
Input Voltage200-240V AC
Output Power120W
Output Current5A
TerminalsPluggable
SignalDC-OK
Output VoltageAdjustable
SizeCompact
Heat GenerationMinimal
View as PDF
Request a Repair

The Allen-Bradley 1606-XL60DR power supply is a 24 Volts DC rated 1606 redundant power supply. This NEC Class 2 power supply is used in N+1 redundant power supply systems. This means that there is always 1 power supply backup unit in place if any single power supply unit fails in the system. The unit is able to work both with AC and DC voltages at the input side. With the switch in the 230 Volts position, the 1606-XL60DR power supply operates at 100 to 120 Volts AC voltages or with 220 to 240 Volts AC. For DC power, anything between 160 and 375 Volts DC is acceptable. All this data shows the flexibility of the 1606-XL60DR power supply, which also has all the relevant industrial certifications and exceptional load characteristics. The unit is also able to prevent short-circuits and overloads in the control circuits connected to the output side.

The Allen-Bradley 1606-XL60DR power supply has a compact and heat-optimized IP 20 enclosure with a design that saves installation space. The unit requires only 49 millimeters x 124 millimeters x 102 millimeters of installation space. It weighs 0.47 kilograms. The 1606-XL60DR power supply is easily mountable onto a DIN rail. It can also be easily connected and disconnected electrically by using pluggable Combicon® connectors (both on the input and output side). The input and output wires used with this device must be between 0.2 and 2.5 millimeters squared in gauge. It is advised to protect this switched-mode power supply unit with a 10 Amps slow-acting fuse. When operating this power supply in a parallel connection, the device implements the current sharing via the soft characteristic.

Revision Part #Also known as
1606-XL60DR Ser A1606-XL60DR/A, Series A, Rev A
Don't see your particular revision? Contact us now.