1606-XLP36C

The 1606-XLP36C module is a CE-marked power supply module manufactured by Allen-Bradley. This XLP series module is widely known for its performance and stability in industrial applications. The power of the module is rated at 36 Watts when it is supplied with an input voltage range of 100 to 240 Volts AC. The output current rating of the module is 2.8 Amps. This compactly manufactured power unit uses the “DC OK” signal and comes with an adjustable output voltage. The 1606-XLP36C module is used with different application demands and it can even provide buffering load current for standard fault conditions and during peak loads. It is a single-phase device. The heat output of the unit is low, which helps to reduce the overall operational costs. It also helps to extend the life of the module. An LED indicator is on the front panel of the module, which shows the running condition of the module.

The Allen-Bradley 1606-XLP36C module is easy to set up and install. It can be mounted and connected quickly with no tools required. The spring clamp helps in the quick installation process. The output voltage of the unit can be adjustable to 12 Volts DC without a jumper and to 15 Volts DC with a jumper. No switch off is required at overload and short circuits. The unit is protected against short circuits, overloads, and open circuits. The maximum power back immunity of the unit is +/- 20 Volts. The 1606-XLP36C module has a green LED indicator which shows the operation of the unit. The module can only be used at an altitude of 2000 meters above sea level.