The 1606-XLP50F module is a compact power supply module. It is a single-phase device that has a rated power output of 50 Watts. The current rating of the power module is 1 Amp. The module is driven by 100 to 240 Volts AC input voltage. The front side has a screw-clamp terminal on the top and bottom of the unit. Also, an LED indicator is present for the “DC OK” signal. The module is equipped with a switching regulator for energy conversion. It is used in a range of applications as a power source. It is compact in size and weight but it offers enhanced efficiency and robust performance. The 1606-XLP50F module is certified with the cULus, CE, CSA, and GL standards. It also meets the EN, RoHS, UL, and CSA standards. The operating temperature range lies between -40 and 70 degrees Celsius. The unit can be mounted by using a DIN Rail.

The 1606-XLP50F module comes with extensive diagnostics and monitoring functions. It is equipped with different LEDs for showing status, diagnosis, check wiring, buffer time, and “end of charge voltage” messages. Also, it is equipped with signal contacts on the front. The signal contacts are used for “ready” (contacts 1 and 2), “buffering” (contacts 3 and 4), “replace battery” (contacts 5 and6) and the “inhibit input” (contacts 7 and 8) messages. The 1606-XLP50F module is 90% efficient and the MTBF rating of the unit is 600,000 hours. The power module is 45 x 75 x 91 millimeters in width, height, and depth. The ripple noise of the unit is greater than 200 mVpp. Output noise suppression is available for radiated EMI. The unit works with low inrush currents and it has an adjustable output voltage. The power module works perfectly at an altitude of up to 2000 meters above sea level.