1606-XLS240EC

The Allen-Bradley 1606-XLS240EC switched-mode power supply module is a power supply module from the 1606 performance power supply module family that is designed to provide charging to capacitors and start motors. This device features a very compact yet highly efficient design that offers the users short-term power capability of up to 150% of nominal rating, and it also offers users protective and diagnostic features for easy use. The 1606-XLS240EC module has single-phase input voltage ratings of 100 to 240 Volts AC or 110 to 300 Volts DC, and continuous current ratings of 2.8 Amps at 100 Volts AC and 1.2 Amps at 240 Volts AC. It has an output voltage range of 24 to 28 Volts DC and a total output power rating of 240 Watts. The 1606-XLS240EC module also has an output current rating of 10 Amps at 24 Volts DC and an extended rating of 15 Amps for 4 seconds duration.

The 1606-XLS240EC module offers a 152% power boost maximum at 360 Watts and a significant increase in the current reserve for handling higher start-up loads. It has a 0.98 power factor value and an efficiency rating of 93.1% at 240 Volts AC. The 1606-XLS240EC module features voltage transient, power surge protection, and electromagnetic emission immunity that makes it ideal for almost all environmental conditions. It has a DC-OK normally open relay contact that closes and opens based on the preset output voltage requirements, and it has easy-connect spring clamp input and output terminals that don’t require tools. The 1606-XLS240EC module has conformally coated circuits and it will function without de-rating within a -20 to 60 degrees Celsius temperature range. It weighs approximately 0.9 kilograms, and it has total dimensions of 60 x 124 x 117 millimeters.