1606-XLS480E-D

The Allen-Bradley 1606-XLS480E-D power supply is a 1606 series 480 Watts rated switched-mode power supply unit. It operates with 600 Volts DC voltage, and its output voltage can be adjusted between 24 and 28 Volts DC with an adjusting mechanism available on the top right part of the device. This power supply unit has the following ratings: 1.5 Amps of input inrush current, 0.85 Amps of typical input current (at 600 Volts DC), 22 milliseconds of hold-up time, and 95% efficiency. It is possible to use the device in parallel and serial connections. The 1606-XLS480E-D power supply weighs approximately 0.89 kilograms and it has dimensions of 65 millimeters x 124 millimeters x 127 millimeters.

The Allen-Bradley 1606-XLS480E-D power supply is a special power supply that is usually used in systems that have AC servo drives. This type of industrial automation device contains an intermediate DC-bus. This is the point in the system to which the 1606-XLS480E-D power supply can be directly connected. If a mains failure happens, a motor connected to the servo drive will still deliver energy back to the DC-bus of the servo drive. This allows the 1606-XLS480E-D power supply to keep the controls and other important equipment connected to it operational until the motor stops. This is how this specially designed power supply unit delivers an efficient and extended power supply to vital system elements, which is a basic requirement for operating any sensitive system in a  plant. Critical segments of a production process are safe with the 1606-XLS480E-D power supply. This unit has 2 internal protective fuses (rated at 4 Amps) to prevent serious damage from short circuits or ground faults.