Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1606 Switched Mode Power Supplies 1606-XLS80E

Product image is representative; revision or series may vary. Contact us to request a specific version.

1606-XLS80E

|

The Allen-Bradley 1606-XLS80E power supply module has been designed as a compact power supply module from the Bulletin 1606-XLS series. It operates with single-phase voltage and it supports extra low levels of inrush current. The 1606-XLS80E power supply module uses 100 to 240 Volts AC voltage at 50 to 60 Hertz of line frequency and 110 to 300 Volts DC voltage. This power supply has advanced reserve power capabilities that allow it to store up to 150% of its rated operating power so that it can charge capacitors, start DC motors, and handle other tasks with large loads. The 1606-XLS80E power supply module has a continuous output power rating of 80 Watts.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1606-XLS80E

ManufacturerAllen Bradley
Product TypeSwitched Mode Power Supply
Product Line1606 Switched Mode Power Supplies
Part Number1606-XLS80E
UPC781180617393
Weight1.00 lbs (0.45 kg)
Input Voltage100-240V AC
Output Power80W
Output Current3.3 A
TerminalsSpring Clamp
SignalDC-OK
Output VoltageAdjustable
SizeCompact
Heat GenerationMinimal

The 1606-XLS80E power supply is a switched-mode power supply from the 1606-XLS series that has been designed and manufactured by Allen-Bradley. All Allen-Bradley 1606 XLS power supplies are known for their reliability and their ability to handle tough AC power supply network conditions. The 1606-XLS80E power supply is the smallest power supply unit in the series that provides a controlled 24 Volts DC power supply with 80 Watts of power available. The expected input voltage for the device is either 100 to 240 Volts AC or 110 to 150 Volts DC, but the operating voltage ranges are 86 to 276 Volts AC and 88 to 188 Volts DC.

The Allen-Bradley 1606-XLS80E power supply has a rated output current of 3.4 Amps at 24 Volts DC, and it is packed in an enclosure that has dimensions of 32 x 124 x 102 millimeters. The unit can be installed both horizontally and vertically. It has internal protection mechanisms to safeguard itself against mains glitches and problems on the output side. The 1606-XLS80E power supply is a first-rate power supply device in terms of efficiency. It has an efficiency rating of up to 91.5%. This power supply is designed for the convection cooling method which means that it does not need an external fan. The unit can retain the DC output above 95% of the nominal voltage if there is no input for 27 to 174 milliseconds (depending on the input voltage value). It is CE, UL, and CSA certified. The total weight of the device is only 0.42 kilograms. The spring clamp terminals on the device can accept 0.5 to 4 mm2 sized wires.

Revision Part #Also known as
1606-XLS80E Ser A1606-XLS80E/A, Series A, Rev A
Don't see your particular revision? Contact us now.