The 1609-D600N power supply is a 1609 uninterruptible power supply unit introduced by Allen-Bradley/Rockwell Automation. This high-quality industrial component is used as a backup power supply for professional systems in almost any industry. The 1609-D series of power supplies offers different variations in order to meet the different requirements of demanding industrial applications. The 1609-D600N power supply has a nominal input and output voltage of 120 Volts AC and an input and output capacity of 390 Watts (600 Volt-Amps). Besides that, the default voltage range for this power supply is 90 to 145 Volts AC and its nominal input current rating is 5.5 Amps. The operating frequency of the unit is 50 to 60 Hertz and the power factor correction is not applicable. The default output voltage range is 108 to 132 Volts AC.

The 1609-D600N power supply has a crest factor of 2.2:1 for short circuit protection and it includes a surge protection rating of up to 380 joules. In addition to that, the unit comes with overload and thermal protection capabilities that could be valuable in critical conditions. The overload protection for this unit provides an immediate shutdown or a shutdown with a delay of 10 seconds. This standardized unit has an efficiency of 75 to 86% with a resistive load and with or without the AVR mode. The battery type that this unit uses is a 36-Volt sealed lead-acid battery. The 1609-D600N power supply unit can withstand an operating temperature of up to 50 degrees Celsius (122 Fahrenheit) and it is intended to be stored at a temperature range between -15 and 45 degrees Celsius (+5 and +113 Fahrenheit). In addition to that, the unit can operate at altitudes of up to 2000 meters (6600 feet) and it has a standard humidity tolerance at 5 to 95% (non-condensing). The approximate weight of the 1609-D600N power supply is 13.5 kilograms or 29.7 pounds while its dimensions are (L x W x H): 220 x 410 x 260 millimeters (8.66 x 16.14 x 10.24 inches).