The 1609-U1000N is an uninterruptible power supply unit that is designed and manufactured by Allen-Bradley/Rockwell Automation. The product is part of the Allen-Bradley 1609-U series that offers superior and versatile industrial components that meet the requirements of industry standards such as UL 1778, CSA C22.2, and BSMI standards. This power supply unit provides consistent and clean power through automatic voltage regulation (AVR) for its boost and trim while not using a battery for the correction of low/high voltage conditions that may occur. Besides that, the 1609-U1000N power supply features pure sine wave output, front-access servicing, and advanced management of the network along with the intelligent management of the battery capacity. 

The 1609-U1000N power supply unit has an input voltage of 120 Volts AC (nominal) and maximum output power of 1000 Volt-Amps (670 Watts). In addition to that, the power supply has a 50 to 60 Hertz capacity frequency with a possible variation of 3 Hertz, along with default voltage range of 82 to 144 Volts AC. The unit includes surge protection of 459 joules and 8 output connections that are NEMA 5-15R rated. The high-quality lead-acid battery of the 1609-U1000N unit’s typical operating time at a full load is 6.1 minutes at 670 Watts/20.6 minutes (335 watts) at half a load and it needs 3 hours to recharge. The unit provides excellent connectivity through the SmartSlot interface port and it includes a USB port along with an RS-232 (DB9) port. The control panel of the unit has an LED status display screen that shows information about the load and battery via bar graphs. In addition to that, the display includes indicators for battery, overload, and battery replacement. The 1609-U1000N power supply unit is 170 millimeters (6.7 inches) wide, 216 millimeters (8.5 inches) high, and 439 millimeters (17.3 inches) long. In addition to that, the unit weighs 22 kilograms (48.4 pounds).

This content was written and compiled by DO Supply and should not be copied.