Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1732 ArmorBlock 1732DS-IB8

Product image is representative; revision or series may vary. Contact us to request a specific version.

1732DS-IB8

|
Need a Specific Revision?

The Allen-Bradley 1732DS-IB8 Safety Input Module has 8 safety inputs and 8 test outputs. It also has current-sinking and current-sourcing input and output types, respectively. The 1732DS-IB8 Safety Input Module by Allen-Bradley has an 11 Volts minimum on-state input voltage rating and a maximum off-state input voltage rating of 5 Volts.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1732DS-IB8

ManufacturerAllen Bradley
CategoryPLCs
Product Line1732 ArmorBlock
Part Number1732DS-IB8
UPC612598336302
Weight1.38 lbs (0.62 kg)
Input TypeCurrent sinking
Minimum On-State Input Voltage11 Volts
Minimum On-State Input Current3.3 milliAmps
Maximum Off-State Input Voltage5 Volts
Maximum Off-State Current1.3 milliAmps
IEC 61131-2 (Input Type)Type 3
Output TypeCurrent sourcing
Maximum Current25 milliAmps
Minimum Current5 milliAmps
Output Current Rating2 Amps (Per Point)
Pilot Duty RatingDC-14
Number of Outputs4 (Dual-Channel)
Isolation Voltage50 Volts (Continuous)
Request a Repair

The Allen-Bradley 1732DS-IB8 Safety Input Module has a current-sinking input type, alongside a current-sourcing output type. The safety module's minimum on-state input voltage rating is 11 Volts, with a minimum on-state input current reading at 3.3 milliAmps. Its maximum off-state input voltage is 5 Volts, with its maximum off-state current rating is 1.3 milliAmps. It also has a Type 3 input type. With respect to pulse test output, the module's pulse test output current is 0.7 Amps, with a maximum residual voltage of 1.2 Volts. The module's maximum output leakage current is 0.1 milliAmps. It has a maximum current of 25 milliAmps and a minimum of 5 milliAmps. The Allen-Bradley 1732DS-IB8 Safety Input Module has an output current rating of 2 Amps maximum per point. The module comes standard with short circuit detection and has a DC-14 pilot duty rating.

The 1732DS-IB8 Safety Input Module by Allen-Bradley has 4 dual-channel outputs and it meets the IP 64, 65, 66, 67, and 69K enclosure type ratings. Its communication power supply voltage is 11-25 Volts with its communication current consumption being 85 milliAmps at 24 Volts. The operating voltage range should be between 19.2 and 28.8 Volts, and its isolation voltage is 50 Volts (continuous), with a reinforced insolation type. The operating temperature should range between -4 and 140 degrees Fahrenheit, and its storage temperature should range between -49 and 185 degrees Fahrenheit. The relative humidity should stay between 5 and 95%. The 1732DS-IB8 Safety Input Module weighs approximately 640 grams, or 1.41 pounds. It has a height of 69 millimeters, a width of 179 millimeters, and a depth of 70 millimeters (2.7 x 7.0 x 2.8 inches).