With respect to its specifications, the 1732E-16CFGM12 Ethernet Module by Allen-Bradley has a sinking 24 Volts input type, along with a sourcing 24 Volts output type. It has a maximum off-state input voltage of 5 Volts and a maximum on-state input voltage of 30 Volts. Its nominal on-state input voltage is 24 Volts and its minimum on-state input voltage is 11 Volts. With regards to its' sensor sources, its maximum sensor source voltage rating is 30 Volts, while its minimum is 11 Volts. The 1732E-16CFGM12 Module has a maximum off-state input current of 1.5 milliAmps at 5 Volts and on-state input current of 5 milliAmps at 30 Volts. It has 16 inputs and 16 outputs.

Other specifications for this module include a maximum on-state output voltage drop of 0.5 Volts and a minimum off-peak blocking voltage of 30 Volts. The nominal on-state output voltage on the 1732E-16CFGM12 Ethernet Module is 24 Volts. The maximum on-state output current is 0.5 Amps on the module, while its maximum current per module is 8 Amps for all the outputs. It has a DC-14 pilot duty rating and an enclosure type rating that meets the IP 65, 66, 67, and 69K (and Type 4X/6P) standards. The module has a 50 Volt continuous isolation voltage with a reinforced insulation type. The operating temperature should range between -4 and 140 degrees, Fahrenheit, and the storage temperature should range from -40 to 185 degrees Fahrenheit. The relative humidity should fall between 5 and 95%, non-condensing. The approximate weight on the 1732E-16CFGM12 Ethernet Module is 0.34 kilograms or 0.75 pounds. The dimensions are 179 x 65 x 43.25 millimeters (or 7.05 x 2.56 x 1.7 inches).